Aleratec 260206 Manual de início rápido - Página 8

Procurar online ou descarregar pdf Manual de início rápido para Hardware informático Aleratec 260206. Aleratec 260206 16 páginas. 1:15 blu-ray/dvd/cd tower duplicator sa

Imprimir página

Making Disc-to-Disc Copies

This process copies a Master Disc to several blank discs simultaneously. Due to
the nature of simultaneous disc duplication, a good quality Master Disc and lower
recording speeds maybe necessary to ensure high success and quality duplications rates.
Note: The duplicator does not support DVD-R to DVD+R duplication.
1.
Turn on the duplicator. After the duplicator has booted up, you will see the
following display:
2.
Make sure the Source Drive is set to the BD/DVD/CD source drive.
It is very important to make sure that your current Source Drive is the BD/DVD/
CD source drive in order to avoid unnecessary error messages. To check the
Source Drive, do the following:
a.
Use UP or DOWN arrow buttons to navigate to the following screen, or
press the "SOURCE" Fast Key:
b.
Press ENT to enter Select Source menu and you will see the following:
Make sure it is located at "Drive 1 Port 0.0". If not, press the UP or
DOWN navigation button to search for it. There will be drive model
information where XXXXXX is shown above
c.
Press ENT to submit your selection.
3.
Go back to the "COPY" menu.
a.
Use UP or DOWN arrow button to navigate to the following screen:
6
Aleratec
1. COPY
COPY
USB
PRESCAN
Aleratec
7. Select Source
COPY
USB
PRESCAN
Drive 1 Port 0.0
XXXXXX
COPY
USB
PRESCAN
Aleratec
1. COPY
COPY
USB
PRESCAN
www.aleratec.com
1.00
ESC
ENT
SOURCE
1.00
ESC
ENT
SOURCE
ESC
ENT
SOURCE
1.00
ESC
ENT
SOURCE