Atlantic Ultraviolet Sanidyne PREMIUM Manual do Proprietário - Página 8
Procurar online ou descarregar pdf Manual do Proprietário para Acessórios Atlantic Ultraviolet Sanidyne PREMIUM. Atlantic Ultraviolet Sanidyne PREMIUM 20 páginas. Germicidal ultraviolet portable area sanitizer
Imprimir página
H
-
r
and
Held
emote
Used to define treatment
2
time in Hours : Minutes
Treatment Time
Set lamp cycle time hours and minutes
00
59
:
01
00
02
01
Done
Displays current time
3
Hours : Minutes : Seconds
Lamp operation indicators
4
illuminate yellow when
lamps are on
5
Start Button
6
Return Button
7
Pause / Continue Button
General Rule of Selection: Except for the ON/OFF button located on the right side of the Hand-held Remote Controller, all
selections made to this device will require a gentle touch of a short period of time to achieve a response.
1. Charging Port: Charge Hand-held Remote Controller using supplied AC Adapter.
2. Treatment Time: Set treatment time in Hours, Minutes. Hold finger on Treatment Time to select until menu changes
to scroll bar. Scroll the numbers up or down, positioning the times chosen in the center row. When times are positioned
correctly, select DONE on the screen to input your Treatment Time choice.
3. Current Time: Displays current time in Hours, Minutes, Seconds. Can be reset under SETTINGS, however this requires a
PIN Number to do this. (See "Setting Date and Time" on Page 12)
4. Lamp Operation Indicators: Lamp status glows yellow when the lamps are operating correctly. If lamp is not operating the
lamp status will be displayed grey for that lamp.
5. Start Button: Starts treatment cycle time.
Once selected:
a) Remaining Time changes to Countdown Time and begins counting down from 1 minute and 30 seconds to exit area
b) The words "LEAVE AREA" appear on the lower status bar.
c) Alarm on unit begins to sound
d) The word "PrEP" flashes on the Keypad during the Countdown Time, when Treatment Time begins the word "run"
flashes and when the treatment time is completed the word "donE" will appear.
6. Return Button: Brings you back to previous screen (Remote Overview Continued on Page 9)
8
C
o
ontroller
verview
Figure 4 – Hand-held Remote Controller Overview
1
Charging Port
LampControl
Treatment Time
00:00:00
Current Time
11:57:14
Lamp Status
1
2
3
Start
Connecting to SANIDYNE
8
Home Button
9
Battery Condition
10
90%
Remaining Time
12
00:00:00
13
Total Op Time
00000:00
4
5
6
7
8
14
Pause
Stop
15
16
Settings Button
Displays Remaining Time and
11
toggles to Countdown Time shown on
Cycle Time Hours : Minutes : Seconds
Begins at ( 1:29 ) minutes when pressed
Volume Button
On /Off Button
Power off
Reboot
Airplane mode
!
Airplane mode is OFF
Airplane mode is ON
Displays accumulative hours
of all treatment times
Stop or End Button
Status Bar:
• Ready
• Intruder Alert
• Session in Progress
• Session Paused
• Session Resumed
• Session Stopped
• Leave Area
• Connected to SANIDYNE