Bosch Series 4 Manual do utilizador e instruções de instalação - Página 19

Imprimir página

Bosch Series 4 Manual do utilizador e instruções de instalação

Fault

The appliance is not

working.

The appliance does

not switch off fully at

the end of a cooking

time.

The time flashes in

the display.

The time does not ap-

pear in the display

when the appliance is

switched off.

lights up in the dis-

play and no settings

can be made on the

appliance.

A message with ap-

pears in the display,

e.g.

Replacing the oven light bulb

If the light in the cooking compartment fails, change

the oven light bulb.

Note: Heat-resistant, 25-watt, 230 V halogen bulbs are

available from the after-sales service or specialist retail-

ers. Only use these bulbs. Hold the new halogen bulbs

only with a clean, dry towel. This increases the service

life of the bulb.

WARNING ‒ Risk of burns!

The appliance and its parts that can be

touched become hot during use.

▶ Caution should be exercised here in order to

avoid touching heating elements.

▶ Young children under 8 years of age must be

kept away from the appliance.

WARNING ‒ Risk of electric shock!

When changing the bulb, the bulb socket con-

tacts are live.

▶ Before replacing the bulb, ensure that the appli-

ance is switched off in order to prevent a poten-

tial electric shock.

▶ Also unplug the appliance from the mains or

switch off the circuit breaker in the fuse box.

Cause and troubleshooting

There has been a power cut.

Check whether the lighting in your room or other appliances are working.

▶

Electronics fault

Disconnect the appliance from the power supply for at least 30 seconds by switching off

the fuse.

Reset the basic settings to the factory settings.

At the end of a cooking time, the appliance stops heating up. The oven light and cooling fan

do not switch off. For types of heating with air recirculation, the fan continues to run in the

back wall of the cooking compartment.

Turn the function selector to the off position.

▶

a The appliance is switched off.

a The oven light and the fan in the back wall are switched off.

a The cooling fan switches off automatically as soon as the appliance has cooled down.

There has been a power cut.

Reset the time.

▶

→ "Setting the time", Page 12

The basic setting has been changed.

Change the basic setting for the time display.

▶

Childproof lock is activated.

Use

to deactivate childproof lock.

▶

→ "Childproof lock", Page 12

Electronics fault

Press

⁠ .

If necessary, reset the time on the clock.

‒

a If the fault was a one-off, the error message disappears.

If the error message appears again, call the after-sales service. State the exact error

message and the E no. for your appliance in full.

→ "Customer Service", Page 20

Requirements

¡ The appliance is disconnected from the power sup-

ply.

¡ The cooking compartment has cooled down.

¡ You have a new halogen bulb to replace the old one.

Place a tea towel in the cooking compartment to

prevent damage.

Turn the glass cover anti-clockwise to remove it.

Pull out the halogen bulb without turning it.

Insert the new halogen bulb and press it firmly into

the socket.

Make sure the pins are positioned correctly.

Depending on the appliance model, the glass cover

may have a sealing ring. Attach the sealing ring.

Screw in the glass cover.

Remove the tea towel from the cooking compart-

ment.

Troubleshooting en