Bosch 2 Manual do utilizador e instruções de instalação - Página 26

Imprimir página

Bosch 2 Manual do utilizador e instruções de instalação

Fault

A message with appears in the

display, e.g.

14.2 Replacing the oven light bulb

If the light in the cooking compartment fails, change

the oven light bulb.

Note: Heat-resistant, 25-watt, 230 V halogen bulbs are

available from the after-sales service or specialist retail-

ers. Only use these bulbs. Hold the new halogen bulbs

only with a clean, dry towel. This increases the service

life of the bulb.

WARNING ‒ Risk of burns!

The appliance gets very hot.

Never touch the inside surfaces of the cooking com-

▶

partment or the heating elements while they are hot.

Always allow the appliance to cool down.

▶

Keep children at a safe distance.

▶

WARNING ‒ Risk of electric shock!

When changing the bulb, the bulb socket contacts are

live.

Before replacing the bulb, unplug the appliance

▶

from the mains or switch off the circuit breaker in

the fuse box.

Requirements

¡ The appliance is disconnected from the power sup-

ply.

¡ The cooking compartment has cooled down.

¡ You have a new halogen bulb to replace the old one.

15 Disposal

Find out here how to dispose of old appliances cor-

rectly.

15.1 Disposing of old appliance

Valuable raw materials can be reused by recycling.

Unplug the appliance from the mains.

Cut through the power cord.

Dispose of the appliance in an environmentally

friendly manner.

Information about current disposal methods are

available from your specialist dealer or local author-

ity.

Cause and troubleshooting

Electronics fault

Press the button.

If required, reset the time.

‒

a If the fault was a one-off, the error message disappears.

If the error message appears again, call the after-sales service. Quote the ex-

act error message and the E no. of your appliance.

→ "Customer Service", Page 24

Place a tea towel in the cooking compartment to

prevent damage.

Turn the glass cover anti-clockwise to remove it ⁠ .

Pull out the halogen bulb without turning it ⁠ .

Insert the new halogen lamp and press it firmly into

the socket.

Make sure the pins are positioned correctly.

Depending on the appliance model, the glass cover

may have a sealing ring. Put the sealing ring in posi-

tion.

Screw the glass cover on.

Take the tea towel out of the cooking compartment.

Connect the appliance to the power supply.

This appliance is labelled in accord-

ance with European Directive

2012/19/EU concerning used elec-

trical and electronic appliances

(waste electrical and electronic equip-

ment - WEEE).

The guideline determines the frame-

work for the return and recycling of

used appliances as applicable

throughout the EU.

Disposal en