Bosch 3 Manual de instruções - Página 14

Procurar online ou descarregar pdf Manual de instruções para Aspirador de pó Bosch 3. Bosch 3 20 páginas. Multifuel stove-defra exempt smokeless fuel
Também para Bosch 3: Manual de instalação e utilização (18 páginas), Manual de instruções original (22 páginas), Manual de instalação, manutenção e instruções de utilização (36 páginas)

Imprimir página

Cleaning and servicing

– With the blade insert with grinding blade

q for grinding and cutting fairly small

quantities of spices (e.g. pepper, cumin,

juniper, cinnamon, dried anise, saffron),

grain (e.g. wheat, millet, linseeds), coffee

and sugar. It is not intended for grinding

very dry, solid foods larger than coffee

beans such as nutmeg, dry ginger ... .

Caution!

Only fill the appliance with roasted coffee or

espresso beans.

W Risk of injury from sharp blades /

rotating drive!

Do not remove/attach the universal cutter

until the drive has stopped.

Do not touch blades of the blade insert with

bare hands.

Fig. F shows guide values for the maximum

quantities and processing times when

working with the universal cutter.

Fig. E

■ Put down universal cutter jug with the

opening face up.

■ Add food, which is to be cut, in the jug.Note

MAX mark on the jug!

■ Place seal on the blade insert. Ensure that

the seal is positioned correctly.

Important information

If the seal is damaged or not correctly

positioned, liquid may run out.

■ Insert blade insert (p/q) into the univer-

sal cutter jug and lock anti-clockwise (m).

Rotate the blade insert at least until the

arrow matches up with the marking on the

universal cutter jug.

■ Turn universal cutter over (blade insert face

down).

■ Attach the universal cutter (arrow on jug on

dot on the appliance .) and rotate all the

way clockwise (,).

■ Insert the mains plug.

■ Set the rotary switch to the desired setting.

Note: The longer the appliance remains

switched on, the finer the ingredients are cut.

Recommendations on using the accessories

can be found in the section "Recipes/

Ingredients/Processing".

After using the appliance

■ Set the rotary switch to P.

■ Remove mains plug.

■ Rotate universal cutter anti-clockwise and

remove.

■ Turn universal cutter over (blade insert face

up).

■ Loosen blade insert clockwise (l) and

remove from the universal cutter jug.

■ Empty jug.

■ Clean all parts, see "Cleaning and

servicing".

Cleaning and servicing

The appliance requires no maintenance.

Thorough cleaning protects the appliance

from damage and keeps it functional.

An overview of cleaning the individual parts

can be found in Fig. G.

W Risk of electric shock

Never immerse the base unit in water or

place under running water.

Warning!

Surfaces may be damaged. Do not use

abrasive cleaning agents.

Note: If processing e.g. carrots and red

cabbage, the plastic parts will become dis-

coloured by a red film which can be removed

with a few drops of cooking oil.

Cleaning the base unit

■ Remove mains plug.

■ Wipe the base unit with a damp cloth.

If required, use a little detergent.

■ Then dry the base unit.

Cleaning the bowl and

accessories

W Risk of injury from sharp blades!

Do not touch blades of the universal blade

with bare hands. When not in use, always

store the universal blade in the blade guard.

Clean them with a brush. Do not grip the

sharp blades or edges of the cutting discs.

Grip the discs by the plastic part in the centre

only!

All parts are dishwasher-proof. Do not wedge

plastic parts in the dishwasher as they could

warp.