Electrolux WRH608I Series Manual de operação/Instruções de instalação - Página 3
Procurar online ou descarregar pdf Manual de operação/Instruções de instalação para Campânula de ventilação Electrolux WRH608I Series. Electrolux WRH608I Series 12 páginas. Retractable
Também para Electrolux WRH608I Series: Manual do utilizador (12 páginas), Manual de operação e manual de instalação (12 páginas)
Imprimir página
INSTALLATION INSTRUCTIONS
Please read instructions carefully. Service calls resulting from incorrect installation will be charged for.
Exhaust air from the Rangehood must not be discharged into any heating fl ue which may carry
combustion products from other sources. In addition, exhaust air must not be discharged into a wall
cavity, unless the cavity is designed for the purpose. Adequate ventilation of the room must
be ensured when the Rangehood is operating simultaneously with appliances burning gas or
other fuels. Installation must comply in all respects with your gas and electrical authorities. This
Rangehood is an indoor domestic appliance, and has been manufactured and tested to comply with
Australian and New Zealand Standard AS/NZS 3350.2.31
It is recommended that the unit be positioned as close as possible to 600mm (electric hobs),
650mm (gas hobs), and no further from the hob than 800mm. The unit becomes less effective
as the distance from the cooking surface to the hood increases.
FIXING POINT DIMENSIONS - 600mm Retractable cooker hood
FIXING POINT DIMENSIONS - 900mm Retractable
cooker hood
The maximum space between the wall and screw cap is 5mm.
13427_Rangehood_Electrolux.indd 3
13427_Rangehood_Electrolux.indd 3
DUCTING INSTALLATION
When installing with ducting pipe the Duct
spigot must be fitted to the ducting hole
on top of the body of the cooker hood
RECIRCULATING INSTALLATION
(For Models: WRH608, RRE634, RRE635, WRH908
& RRE934)
When installed in recirculating mode the
ducting hole cover must be fitted
OPERATION GUIDE & INSTALLATION INSTRUCTIONS
650
600
Duct Spigot
Ducting hole
cover
P2
3/11