Electrolux WRJ611U Manual de instalação e operação - Página 3
Procurar online ou descarregar pdf Manual de instalação e operação para Campânula de ventilação Electrolux WRJ611U. Electrolux WRJ611U 4 páginas. Universal cooker hood
Também para Electrolux WRJ611U: Manual de instalação e operação (4 páginas)
Imprimir página
Cooker Hood Operation
IMPORTANT: The Edison Screw lamps may have come loose during transportation. Ensure that lamps are tightened firmly into the socket
before power is applied.
Best results are obtained by using a low speed for normal conditions and a high speed when odours are more concentrated. Turn the hood on a few
minutes before you start cooking. It should by left on after cooking for about 15 minutes or until all odours have disappeared.
Slide switch controls
This switch is used to turn the light fitted in the
Light switch:
hood on and off.
Extractor fan switch:
Used to select fan speeds
Slide position I:
Fan speed Lo.
Slide position II:
Fan speed Med.
Slide position III:
Fan speed High.
Replacing lamps:
Ensure the appliance is switched off before carrying out maintenance,
to avoid any possibility of electric shock. Remove grease filter to
replace lamp. Replace with 40W (maximum) E14 candle lamp.
Press button switch controls
Light switch: Depress light button to turn light ON. Press light button
to turn light OFF.
Extractor fan switch interlocked switching: Select a fan
speed, depress button to turn fan ON. Press button (O) to turn fan
OFF.
Maintenance:
Clean grease filters every three to four weeks maximum. Greasy filters
are a fire risk.
Remove the grease filters, soak and agitate in hot soapy water.
Rinse, drain and shake well before replacing filters.
Do not use oven cleaners or other caustic materials.
Recirculating accessory:
Optional carbon filter ARCFD for recirculating mode only.