Bosch 8 Series Manual de instruções de instalação e utilização - Página 12

Imprimir página

Bosch 8 Series Manual de instruções de instalação e utilização

General information

Warning

Risk of injury!

Components inside the appliance may have

■

sharp edges. Wear protective gloves.

The appliance may fall down if it has not

Risk of injury!

■

been properly fastened in place. All

fastening components must be fixed firmly

and securely.

The appliance is heavy. To move the

Risk of injury!

■

appliance, 2 people are required. Use only

suitable tools and equipment.

Changes to the electrical or mechanical

Risk of injury!

■

assembly are dangerous and may lead to

malfunctions. Do not make any changes to

the electrical or mechanical assembly.

Risk of falling when working on the

Risk of injury!

■

appliance. Use a stable stepladder.

Warning

Risk of electric shock!

Components inside the appliance may have

sharp edges. These may damage the

connecting cable. Do not kink or pinch the

connecting cable during installation.

Warning

Risk of electric shock!

It must always be possible to disconnect the

appliance from the power supply. If there is a

fixed connection, an all-pole isolating switch

with a contact gap of at least 3 mm must be

provided for the wiring. Only an electrician

may install the fixed connection.We

recommend installing a residual-current circuit

breaker (RCCB) in the appliance's power

supply circuit.

Warning

Risk of electric shock!

Incorrect repairs are dangerous. Repairs may

only be carried out and damaged power

cables replaced by one of our trained after-

sales technicians. If the appliance is defective,

unplug the appliance from the mains or switch

off the circuit breaker in the fuse box. Contact

the after-sales service.

Warning

Danger of suffocation!

Packaging material is dangerous to children.

Never allow children to play with packaging

material.

KGeneral information

P reparing the ceiling

G e n e r a l i n f o r m a t i o n

The ceiling must be flat, horizontal and have

■

adequate load-bearing capacity.

The depth of the bore holes must be the same

■

length as the screws. The wall plugs must have a

secure grip.

The enclosed screws and wall plugs are suitable for

■

solid brickwork. Suitable fasteners must be used for

other structures (e.g. plasterboard, porous concrete,

poroton bricks).

The maximum weight of the extractor hood is 26 kg.

■

Electrical connection

Warning

Risk of electric shock!

It must always be possible to disconnect the appliance

from the power supply. If there is a fixed connection, an

all-pole isolating switch with a contact gap of at least

3 mm must be provided for the wiring. Only an

electrician may install the fixed connection.We

recommend installing a residual-current circuit breaker

(RCCB) in the appliance's power supply circuit.

Warning

Risk of electric shock!

Components inside the appliance may have sharp

edges. These may damage the connecting cable. Do

not kink or pinch the connecting cable during

installation.

The required connection information can be found on

the rating plate inside the appliance; to access it, you

will need to remove the activated charcoal filter.

Length of the cable: approx. 1.30 m

This appliance complies with the EC interference

suppression regulations.

The appliance must be disconnected from the power

supply whenever installation work is being carried out.

When the appliance is installed, protection must be

provided against accidental contact in the future.