Electrolux # Manual de utilização e cuidados - Página 12

Imprimir página

Electrolux # Manual de utilização e cuidados

Setting

the clock

When the appliance is first powered up or when the power

supply to the appliance has been interrupted, the display

will flash "12:00". The time of day must first be set in order

to properly operate the oven.

To set the clock:

once (do not hold keypad down).

Press

Within 5 seconds, press and hold the /_

or V

until

the correct time of day appears in the display.

* The clock cannot be changed when self-clean is active.

* (Some models) To turn the clock OFF or ON in the

display press _'S°e_) and hold for 15 seconds (acceptance

tone will sound) and then release. This feature does

not remove the set time of day from the memory of the

control. When the display is turned OFF the time of day

will reappear for a few seconds any time the

pad

istouched.

Changing

between

continuous

bake

setting

or 12-Hour

Energy

Saving

feature

The oven control has a built-in 12-Hour Energy Saving

feature that will shut off the oven if the control is left on for

more than 11 hours and 59 minutes. The oven can be

programmed to override this feature for continuous baking.

Changing to continuous bake setting:

Press and hold _

for 5 seconds until acceptance

tone sounds, "----

hr" will appear in display for

continuous cooking. The current time of day will return

to the display.

To cancel the continuous bake setting, press and hold

for 5 seconds until

tone sounds.

acceptance

"12hr" will appear in display indicating that the control

has returned to the 12-Hour Energy Saving feature.

Changing

between

the

temperature

display

modes

(°F or °C)

The electronic oven control is set to display in Fahrenheit

(°F) from the factory.

To change the temperature

to display °C (Celsius) or

from °C to °F (control

should not be set for Bake or

Self-clean

when setting this feature):

Press _.

"appears in the display.

Press and hold /_

until "HI" appears in the display.

Press and hold (Bro_ until F or C appears in the

display.

Press the/_

or V

to switch between the display

modes (°F to °C or °C to °F).

Press any control keypad to return to normal operating

mode.

Timer

The minute timer serves as an extra timer in the kitchen

that will beep when the set time has run out. The timer can

be used alone or while using other oven features. When

the timer is active, to briefly view information for any other

active feature, press the keypad for that feature.

To set the timer:

Press _.

Press the/_

to increase the time in one minute

increments. Press and hold the /_

to increase the time

in 10 minute increments. The timer can be set for any

amount of time from 1 minute to 11 hours and 59

minutes.

If the V

pad is pressed first, the minute timer will

advance to 11 hours and 59 minutes.

When the set time has run out, the timer will beep 3

times and will continue to beep 3 times every 60

seconds until _

is pressed.

To make changes to the timer while it is in use:

While the timer is active and shows in the display, press

and hold the /_

or _/

to increase or decrease the

time remaining.