Electrolux # Manual de utilização e cuidados - Página 12

Figure 1

Figure 3

Figure 5

Figure 7

ESEC Lockout Feature ( - - 6)See.

Setting Surface Controls

LED MESSAGES OR LIGHT INDICATORS DISPLAYED

BY ELEMENT CONTROLS (CONT)

The available ESEC Window Display Settings

The ESEC control will display heat levels ranging from Hi (Figure 1) to Lo

(Figure 6) and OFF (Figure 7). The settings between 9.0 (Figure 2) and 3.0

(Figure 3) decrease or increase in increment of .5 (1/2). The settings

between 3.0 (Figures 3 & 4) and 1.0 (Figure 5) are Simmer settings which

Figure 2

decrease or increase in increment of .2 (1/5) to Lo (Figure 6; lowest

Simmer setting) for more precise settings at lower heat levels. Use the

Recommended Surface Setting Chart to determine the correct setting for

the kind of food you are preparing.

Hot Element Indicator Message (HE)

After using any of the single, dual or triple radiant element positions the cooktop

Figure 4

will become very hot. Even after turning the control knob to OFF, the cooktop

will remain hot for some time. The ESEC control monitors the temperature of

the cooktop and displays the message "HE" (hot element; See Fig. 8) warning

when the cooktop is still too hot to touch. If the HE message appears in the

window, the control can still be turned ON again for use.

Figure 6

Figure 8

THE RECOMMENDED SURFACE COOKING SETTINGS

Use the chart to determine the correct setting for the type of food you are preparing.

Recommended Surface Settings Chart

Setting

Type of Cooking

HIGH (HI)

Start most foods; bring water to a boil and pan broiling.

MEDIUM HIGH (8-10)

Continue a rapid boil; frying, deep fat frying.

MEDIUM (6)

Maintain a slow boil; thicken sauces and gravies; steaming

vegetables.

MEDIUM LOW (2 - 4)

Keep foods cooking; poaching and stewing.

LOW (LO) (LH)

Keep warm, melting and simmering.

Note: The size and type of cookware used will influence the setting needed for best cooking

results.