Electrolux # Manual de utilização e cuidados - Página 9

Imprimir página

Electrolux # Manual de utilização e cuidados

LOCATIONS OF THE BURNERS

The 30" cooktop is equipped with different sized burners.

The surface burners are located on the cooktop as follows (See Figure):

- a 5 000 BTU (natural gas) burner located at the right rear position;

- a 18 000 BTU (natural gas) burner located at the left rear position;

- a 9 500 BTU (natural gas) burner located at the left front position;

- and a 14 000 BTU (natural gas) burner located at the right front position.

The 36" cooktop is equipped with different sized burners.

The surface burners are located on the cooktop as follows (See

Figure):

- a 5 000 BTU (natural gas) burner located at the right rear position;

- two 9 500 BTU (natural gas) burners located at the left front and left

rear positions;

- a 18 000 BTU (natural gas) burner located at the center position;

- and a 14 000 BTU (natural gas) burner located at the right front

position.

PLACEMENT OF BURNER HEADS AND CAPS

For the 18 000 BTU burner :

Place the burner head over the gas orifice (Figure 1). Be careful not to damage the

electrode while placing the burner head over the orifice. Make sure electrode fits

correctly into slot in burner head.

For all burners :

Place a burner cap on each burner head

(see Figure 2), matching the cap size to the

head size. The cap for each burner has an

inner locating ring which centers the cap

correctly on the burner head. Be sure that

all the burner caps and burner heads are

correctly placed BEFORE using your

appliance.

Make sure each burner cap is properly

aligned and level.

Turn the burner on to determine if it will

light. If the burner does not light, contact a

Service Center. Do not service the sealed

burner yourself.

Surface Cooking

Burner Cap

Burner

Head

Gas

opening

Figure 1

O F F

30" cooktop

36" cooktop

Burner

Cap

Burner

Head

Figure 2