OBJ_BUCH-840-002.book Page 15 Thursday, December 11, 2008 4:11 PM
When the battery is defective, liquid can es-
cape and come into contact with adjacent
components. Check any parts concerned.
Clean such parts or replace them, if required.
Use the battery only in conjunction with your
Bosch power tool. This measure alone pro-
tects the battery against dangerous overload.
Functional Description
Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may
result in electric shock, fire and/or
serious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
Intended Use
The power tool is intended for cutting sheet
metals without loss due to metal chips. It is suit-
able for curved and straight cuts.
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Battery unlocking button
2 Battery
3 Button for charge-control indicator
4 Battery charge-control indicator
5 On/Off switch
6 Chip deflector
7 Allen key
8 Fastening screw for upper cutter
9 Upper cutter
10 Bottom cutter
11 Adjustment screw, bottom cutter
12 Fastening screw for bottom cutter
13 Setting gauge*
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Bosch Power Tools
Technical Data
Cordless Sheet Metal
Shears
Article number
Rated voltage
Stroke rate at no load n
min
0
Max. steel sheet cut-
ting capacity*
Smallest curve radius
Weight according to
EPTA-Procedure
01/2003
2
* to 400 N/mm
with reference to steel sheet
Please observe the article number on the type plate
of your machine. The trade names of the individual
machines may vary.
Noise/Vibration Information
Measured values determined according to
EN 60745.
Typically the A-weighted sound pressure level of
the product is less than 70 dB(A). Uncertainty
K < 1.5 dB.
The noise level when working can exceed
80 dB(A).
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Vibration emission value a
h
2
Uncertainty K < 1.5 m/s
.
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
The declared vibration emission level repre-
sents the main applications of the tool. However
if the tool is used for different applications, with
different accessories or poorly maintained, the
vibration emission may differ. This may signifi-
cantly increase the exposure level over the total
working period.
1 609 929 S25 | (11.12.08)
English | 15
GSC 10,8 V-LI
Professional
3 601 J26 1..
V=
10.8
-1
3600
mm
1.3
mm
15
kg
1.4
2
= 3.5 m/s
,
Imprimir página