OBJ_BUCH-2006-001.book Page 16 Tuesday, October 8, 2013 10:38 AM
16 | English
Do not operate the power tool stationary. It is not de-
signed for operation with a saw table.
Do not use high speed steel (HSS) saw blades. Such saw
blades can easily break.
Do not saw ferrous metals. Red hot chips can ignite the
dust extraction.
Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
Do not open the battery. Danger of short-circuiting.
Protect the battery against heat, e.g., against
continuous intense sunlight, fire, water, and
moisture. Danger of explosion.
In case of damage and improper use of the battery,
vapours may be emitted. Ventilate the area and seek
medical help in case of complaints. The vapours can irri-
tate the respiratory system.
Use the battery only in conjunction with your Bosch
power tool. This measure alone protects the battery
against dangerous overload.
Product Description and
Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for lengthways and crossways cut-
ting of wood with straight cutting lines as well as mitre cuts in
wood while resting firmly on the workpiece.
The light of this power tool is intended to illuminate the power
tool's direct area of working operation and is not suitable for
household room illumination.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Battery pack
2 Battery unlocking button
3 Lock-off button for On/Off switch
4 On/Off switch
5 Allen key
6 Spindle lock button
7 Base plate
8 Fastening bolt for parallel guide
9 Scale for mitre angle
1 619 P11 365 | (8.10.13)
10 Wing bolt for bevel-angle preselection
11 Cutting mark, 45°
12 Cutting mark, 0°
13 Blade guard
14 Handle (insulated gripping surface)
15 Battery charge-control indicator
16 Temperature control/overload protection indicator
17 Wing bolt for cutting depth preselection
18 Cutting-depth scale
19 Lever for retracting blade guard
20 Saw spindle
21 Retracting blade guard
22 Mounting flange
23 Saw blade
24 Clamping flange
25 Clamping bolt
26 "PowerLight"
27 Reference mark for mitre angle setting
28 Fastening screw for extraction adapter
29 Extraction adapter*
30 Vacuum hose*
31 Reference mark for cutting depth setting
32 Parallel guide/guide rail adapter*
33 Set of screw clamps*
34 Guide rail*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Circular Saw
Article number
Rated voltage
No-load speed
min
Cutting depth, max.
– for 0° bevel angle
– for 45° bevel angle
Spindle lock
Base plate dimensions
Saw blade diameter, max.
Saw blade diameter, min.
Blade thickness, max.
Tooth thickness/setting, max.
Tooth thickness/setting, min.
Mounting bore
Weight according to
EPTA-Procedure 01/2003
GKS 10,8 V-LI
3 601 FA1 0..
V=
10.8
-1
1400
mm
26.5
mm
17.0
mm
167 x 88
mm
85
mm
85
mm
0.7
mm
1.1
mm
1.0
mm
15
kg
1.4
Bosch Power Tools
Imprimir página