Bosch BBH2 Series Manual de instruções - Página 8

Procurar online ou descarregar pdf Manual de instruções para Aspirador de pó Bosch BBH2 Series. Bosch BBH2 Series 30 páginas.

Imprimir página

Emptying the dust container

In order to achieve the best possible vacuuming

results, the dust container should be emptied after

every use.

Fig.

Remove the hand-held cordless vacuum cleaner from

the hand-held vacuum cleaner (see fig. 7)

Using the release button, unlock the dust container

and remove it from the motor unit.

Fig.

Use the handle to remove the motor protection filter

and foam filter from the dust container.

Empty the dust container.

Cleaning the filter

Fig.

Unlock the dust container. Remove the motor

protection filter and foam filter from the dust

container (see fig. 11 and 12)

Clean the motor protection filter and foam filter by

tapping out the dirt.

If there are heavy deposits of dirt, the filter and dust

container can be washed out.

Then wipe out the dust container with a dry cloth;

allow the filter to dry completely before re-inserting

it.

Fig.

a) Insert the motor protection filter and foam filter into

the dust container.

a) Fit the dust container onto the motor unit and lock it

into place.

New filters can be obtained from our after-sales

service, if required.

Cleaning the floor tool

Before carrying out any maintenance, switch off the

vacuum cleaner and disconnect it from the charging

cable.

Fig.

Release the brush roller using the release button and

pull it sideways out of the floor tool.

Using the groove provided, cut through threads and

hairs wound round the rollers with scissors and then

remove them.

Push the brush roller in sideways along the guide rod

in the floor tool and lock in place using the release

button.

Caution: The floor tool must only be put into

operation with the brush roller fitted.

Caution!

Floor tools are subject to a certain amount of wear,

depending on the type of hard floors you have

(e.g. rough, rustic tiles). Therefore, you must check

the underside of the floor tool at regular intervals.

Worn undersides of floor tools may have sharp edges

that can damage sensitive hard floors, such as parquet

or linoleum. The manufacturer does not accept any

responsibility for damage caused by worn floor tools.

Replacing the battery pack

The battery pack can be removed from the appliance

using the handle and

replaced.

Fig.

Release the battery pack in the direction of the

arrow and remove it from the appliance.

Insert the new battery pack and lock it in place.

A new or additional battery pack can be obtained from

our after-sales service by stating the appliance type.

Care

Before cleaning the cordless vacuum cleaner or hand-

held vacuum cleaner, they must be switched off and

disconnected from the charging cable. They can be

cleaned using a standard commercially-available plastic

cleaner.

Do not use a scourer, glass-cleaning agent or multi-

purpose cleaning products. Never immerse the

vacuum cleaner in water.

Disposing of the battery pack

Before disposing of the appliance, remove the battery

pack and dispose of it in an environmentally friendly

way. (see fig. 16)