Absara Audio 1695T Black Magick Manual do utilizador - Página 4

Procurar online ou descarregar pdf Manual do utilizador para Amplificador de instrumentos musicais Absara Audio 1695T Black Magick. Absara Audio 1695T Black Magick 8 páginas.

Imprimir página

Anatomy and Usage

2.1

Front Panel

IN 1+2

Instrument input for using channel 1 and channel 2 in parallel. Plugging an instrument into this input,

sends the signal to both preamps in parallel. When a second instrument is connected to IN 2, IN 1+2

only connects to channel 1.

IN 2

Instrument input for using channel two by itself.

VOL1

Controls the volume level of channel 1.

VOL2

Controls the volume level of channel 2.

TONE (2)

Controls Bass/Treble balance.

SPEED

Controls the speed of the Tremolo eﬀect.

TREMOLO FTSW

Allows remote shutoﬀ of the Tremolo function via latching footswitch, using a 1 4 TS cable.

DEPTH

Controls the depth of the Tremolo eﬀect.

STANDBY SWITCH

This turns on the high voltage to the tubes. The tubes should warm up for at least one minute before

turning standby switch to OPERATE. Be sure that the Volume control is set to a reasonable position

before switching the ampliﬁer to OPERATE as this ampliﬁer can be very loud! For short breaks (5

minutes or less), using the standby switch will increase tube life.

PILOT LIGHT

This shows that AC Mains voltage is ﬂowing to the ampliﬁer.

POWER SWITCH

Turns on AC power to the ampliﬁer. The Power switch should be turned on, and the pilot light should

be lit for 1 minute before turning the standby switch to OPERATE.