Drill Master 107245 Manual de Instruções - Página 13
Procurar online ou descarregar pdf Manual de Instruções para Moedor Drill Master 107245. Drill Master 107245 16 páginas. Grinding machine
Imprimir página- press centering pin of tool holder against the stop limit adjustment screw
- grind tool with oscillating movement of the table
- take tool holder out and check with a magnifying glass. Grind the drill paint relief facet until it meets
and blends into paint location.
- adjust with stop limit adjustment screw
c. grinding facet of inner cutting edge relief (Facet 3)
- position centering pin
○
- loosen knob
19 and swing station 2 as far as possible to the left (pos. 3). Tighten the knob again.
- press centering pin of tool holder against the stop limit adjustment screw
- grind tool with oscillating movement of the table
- check with magnifying glass inner cutting edge should meet and blend into paint location
- adjust with stop limit adjustment screw
d. grinding oil chamber clearance anole(Facet 4)
- position centering pin
○
- loosen knob
19 and swing station 2 as far as possible to the right (pos. 4). Tighten the knob again
- press centering pin of tool holder against the stop limit adjustment screw
- grind tool with oscillating movement of the table
- check with magnifying glass if sufficient clearance for oil chamber is achieved. This angle should
blend into edge of flute only. The nose grind is now complete
- adjust with stop limit adjustment screw
3. exchange of grinding station (depending on nose grind)
a. exchange of grinding station 1
- pull spring loaded pin
○
- loosen knob
18 and swing station to the right until station 1 is no longer clamped under the
○
clamping plate
22
DrillMasters Eldorado Tool, Inc.
○
15
○
3 of tool holder into guide slot
○
6
○
3 of tool holder into guide slot
○
7
○
20 down and rotate if 90° to lock if in lowered position
Page 13 of 16
○
15
○
12
○
16
○
13
○
17