Atlas Donaire Manual de instruções - Página 9

Procurar online ou descarregar pdf Manual de instruções para Ventilador Atlas Donaire. Atlas Donaire 13 páginas. 52” ceiling fan

7. FINISHING THE

INSTALLATION

1. Tuck connections neatly into ceiling outlet

box.

2. Slide the canopy up to hanger bracket and

place the key hole on the canopy over the

screw on the hanger bracket, turn canopy

until it locks in place at the narrow section of

the key holes. (Fig. 12)

3. Align the circular hole on canopy with the

remaining hole on the hanger bracket, secure

by tightening the two set screws. Note:

Adjust the canopy screws as necessary until

the canopy and canopy cover are snug.

Warning: Make sure tab at bottom of hanger

bracket is properly seated in groove of

hanger ball before attaching canopy to

bracket. Failure to properly seat tab in groove

could cause damage to electrical wiring.

8. ATTACHING THE FAN

BLADES

Insert the blade through the slot in the

housing. Align the holes in the blade and the

fan motor assembly and secure with the

blade attachment screw (with lock washer)

and blade support plate.

Repeat this procedure with the remaining

blades.

Outlet box

Hanger

bracket

Screws

Canopy cover

Figure 12

Blades

Blade

support

plates

Screws with

lock washers

Figure 13

Canopy