Atlas Irene Manual de instruções - Página 6

Procurar online ou descarregar pdf Manual de instruções para Ventilador Atlas Irene. Atlas Irene 11 páginas. 52” ceiling fan, ac 120v. 60hz

Imprimir página

5. ATTACHING THE FAN

BLADES

1. Fasten blade to motor using the screws supplied.

(Fig. 5)

2. Repeat process with other blades. Tighten each

screw and make sure the blade is straight.

NOTE: This fan includes is supplied with two types

of blades installation. Follow the step below to

installing your fan blade properly.

The inner holes are for 3 blades. ( for Irene-3)

The outer holes are for 5 blades. ( for Irene-5)

6. HANGING THE FAN

Before touching a screw driver thoroughly

read these instructions.

Warning/Caution: Before installing fan, turn off

power at service panel and check all visible

screws and bolts for tightness.

1. Remove the decorative canopy bottom cover

from the canopy by turning the cover counter

clockwise. (Fig. 6)

2. Remove the hanger bracket from the canopy

by removing the 1 of 2 screws from the

bottom of the hanger bracket and loosening

the other one a half turn from the screw head.

Next, turn the canopy counter clockwise to

removing the hanger bracket from the

canopy. (Fig. 6)

3. Secure the hanger bracket to the ceiling outlet

box using screws and washers included with

your outlet box. (Fig. 7)

4. Remove hanger ball from down rod assembly

by loosening set screws, removing the cross

pin and sliding ball off rod. (Fig. 8)

Blade

Electrical

box

Ceiling

hanger

bracket

Hook

Hanger

ball

Screw

Figure 5

Ceiling

hanger

bracket

Ceiling

canopy

Canopy

cover

Figure 6

Washers

Mounting screws

(supplied with

120V Wires

electrical box)

Figure 7

Cross pin

Set screw

Downrod

Figure 8