Bosch Series 4 Manual do utilizador e instruções de instalação - Página 37

Imprimir página

Bosch Series 4 Manual do utilizador e instruções de instalação

¡ If required, the mains cable must only be replaced

by a qualified electrician. A replacement mains

cable is available from the after-sales service.

¡ Do not use any multiple plugs or multi-connectors

and extension cords.

¡ The earthing system is correctly installed.

¡ If using a residual current device, only use one that

bears the mark

. The presence of this mark is the

only way to be sure that it fulfils all the applicable

regulations.

¡ The mains cable does not come into contact with

heat sources.

19.8 Power cable with protective contact

plug

Connect the appliance only to a correctly installed,

earthed socket.

If the plug can no longer be accessed following install-

ation, provide a separator in the phases in the fixed

electrical installation in accordance with the set-up in-

structions.

19.9 Power cable without protective contact

plug

Only allow a licensed professional to connect the appli-

ance.

Provide a separator in the phases in the fixed electrical

installation in accordance with the construction instruc-

tions. Identify the phase conductor and the neutral con-

ductor (zero conductor) in the socket. An incorrect con-

nection may damage the appliance.

Only connect in accordance with the connection dia-

gram. The information about the voltage can be found

on the rating plate. Connect the wires of the mains

power cable according to the colour coding:

Cable colour

Green-yellow

Blue

Brown

19.10 Securing the appliance

¡ Slide the appliance in fully and centre it.

¡ Screw the appliance into place.

The gap between the worktop and the appliance must

not be closed by additional battens.

Cable type

Earthing cable

Neutral conductor (zero)

Phase conductor (external

conductor)

Do not attach any thermal insulation strips to the side

panels of the surround unit.

To remove:

¡ Disconnect the appliance from the power supply.

¡ Undo the fastening screws.

¡ Lift the appliance slightly and pull it out completely.

Installation instructions en