Atlas Copco ETVST101-370-20F Instruções do produto - Página 6

Procurar online ou descarregar pdf Instruções do produto para Ferramenta eléctrica Atlas Copco ETVST101-370-20F. Atlas Copco ETVST101-370-20F 20 páginas. Electric angle nutrunner

Product information

Country of origin

Please refer to the information on the product label.

Dimensional drawings

For information about the dimensions of a product, see the Dimensional drawings archive:
http://webbox.atlascopco.com/webbox/dimdrw

Overview

The Tensor system

The Tensor system consists of a range of tightening tools powered by brushless electric motors and differ-
ent drive units.
Motors are available in different sizes. All tools are protected from overheating of the motor. Electrical pro-
tection system is based on an earth fault circuit brake, Earth Fault Protector (EFP). The EFP senses small
current leakage (>30mA) and if leakage occurs, the drive is switched off (30ms). Changing, interfering or
tampering with the protection system voids all warranty and obligations from Atlas Copco. Trouble-shoot-
ing and re-start of the system may only be carried out by an authorized person. Check the function of the
EFP on a regular basis by pressing the trip-button. The EFP should switch off accordingly.

Technical data

Ordering No
Model
Model type
Distance center to side
Speed
Length
Torque range
Torque range
Square drive
Weight
Weight
Height
Motor power
Motor voltage
Motor voltage type

Service overview

Service recommendations

Preventive maintenance is recommended at regular intervals. See the detailed information on preventive
maintenance. If the product is not working properly, take it out of service and inspect it.
If no detailed information about preventive maintenance is included, follow these general guidelines:
Clean appropriate parts accurately
6
EN
© Atlas Copco Industrial Technique AB - 9836 8433 01
8433208248
ETV ST101-370-20-F
Angle
33 mm
280 r/min
672 mm
90–370 Nm
66–273 ft lb
3/4 in
7.3 kg
16.1 lb
62 mm
1500 W
200 V
3 a.c.
ETVST101-370-20F