Bose 31763 Manual do Proprietário - Página 6

Procurar online ou descarregar pdf Manual do Proprietário para Altifalantes Bose 31763. Bose 31763 19 páginas. Outdoor speakers

Setting Up

Making the connections

Figure 4

Stripping the wires

Figure 5

Reinforcing the wire nuts

WARNING: Before making any connections, turn off your receiver or ampliﬁer and unplug it

from the AC power (mains) outlet.

Speaker cord consists of two insulated wires. Usually one is ribbed or red (+), and the other

plain or black (–). Direct-burial cable has a protective outer jacket around the wires.

Consider the following guidelines before cutting any cords:

• Measure the length of cord needed to connect each speaker to your receiver/ampliﬁer

• Strip the outer jacket back 2". Strip the inner insulation on both wires back

(Figure 4).

1. Connect the positive (ribbed or red) speaker wire to the positive (red) wire from the

speaker cable. Twist the stripped wires together.

2. Secure the wire nuts with a twisting motion. If you prefer to reinforce the wire nuts, use

electrical tape (Figure 5).

3. Connect the negative (plain or black) wire to the negative (black) wire from the speaker

cable, as in steps 1 and 2 above.

Connecting the speaker cord to the receiver/ampliﬁer

1. Connect the speakers on the left side of the listening area to the left channel of your

receiver/ampliﬁer (Figure 6).

a. Attach the positive (ribbed) wire to the red (+) terminal.

b. Attach the negative (plain) wire to the black (–) terminal.

2. Connect the speaker on the right side of the listening area to the right channel of your

receiver or ampliﬁer, as above.

Note: If your Free Space

secondary set of speakers, be sure to make the appropriate connections to the "B" channel.

AM268612_00 _V.pdf • January 10, 2003

2 inches (5.0 cm)

Outer jacket

1/2 inch (1.3 cm)

inch (1.3 cm)

51 speakers are being connected to your receiver/ampliﬁer as a

" (1.3 cm)