Bose 901 Manual do Proprietário - Página 14

Procurar online ou descarregar pdf Manual do Proprietário para Altifalantes Bose 901. Bose 901 41 páginas. Vi direct/reflecting speaker system
Também para Bose 901: Manual do Proprietário (23 páginas), Instruções de montagem e instalação (1 páginas), Manual do Proprietário (12 páginas), Manual de instalação e operação (15 páginas), Manual do Proprietário (20 páginas)

Using other equipment

Figure 8

Connecting a tape deck to the

901 active equalizer

5. Move the receiver BALANCE control to the extreme left and then to the extreme right.

This tests the left and right channel orientation. If the channels are reversed, check the

connections.

6. Turn off the receiver and temporarily unplug the 901

power outlet.

7. Turn your receiver back on. You should not hear any music through the system. If you do,

the equalizer is probably connected incorrectly. Check the equalizer connections.

8. Turn off the receiver before restoring AC power to the 901 equalizer. Plug the equalizer

back in to its AC outlet. The system is now ready for use.

You can use the Bose

901 active equalizer TAPE CONNECTION jacks for a tape deck, VCR

audio connection, signal processors, or other components. This will be necessary if your

receiver has only one tape connection and you have connected the equalizer to it. If you

connected the equalizer to the receiver's TAPE 2 connection, you can use TAPE 1 for these

components.

Before making any connections, turn off the receiver and components. Be sure the active

equalizer power indicator is off.

To add a tape deck or VCR:

1. Use cables with RCA connectors at each end. One color (usually red) is for right (R) chan-

nel connections and the other connector is for left (L) channel connections.

2. Connect the TAPE RECORDER OUTPUT of the equalizer to the LINE IN/REC of the tape

deck. Connect right channel to right channel and left channel to left channel.

3. Connect the TAPE RECORDER INPUT of the equalizer to the LINE OUT/PLAY of the tape

deck. Connect right channel to right channel and left channel to left channel.

Note: To use an external signal processor, or to add a graphic equalizer, contact Bose for more

information. Refer to the inside back cover of this guide.

A free booklet is available (USA only): Guide to Optional System Connections for Bose

Direct/Reflecting

Speaker Systems. Ask for part number 149393.

active equalizer from its AC (mains)

Setting Up

901