Bose 901 Manual do Proprietário - Página 8

Procurar online ou descarregar pdf Manual do Proprietário para Altifalantes Bose 901. Bose 901 12 páginas. Vi direct/reflecting speaker system
Também para Bose 901: Manual do Proprietário (41 páginas), Manual do Proprietário (23 páginas), Instruções de montagem e instalação (1 páginas), Manual de instalação e operação (15 páginas), Manual do Proprietário (20 páginas)

Setting Up

Connecting the speaker system to power

Figure 5

Dual-voltage selector

switch settings

CAUTION: DO NOT plug the power cord into an AC (mains) outlet until you complete

all connections.

CAUTION: If you have a dual-voltage system, make sure that the voltage selector switch

(115V/230V) on the bottom of the powered (left) speaker is in the proper position for the volt-

age supplied by your local electric utility. See step 1 and Figure 5.

1. If you did not purchase a dual-voltage system , go to step 2.

If you purchased a dual-voltage system , set the 115V/230V voltage selector switch on

the bottom of the pedestal of the powered (left) speaker (Figure 5) to the correct position

for your region:

North & Central

If you are not sure about what setting to use, contact your local electric utility for the

appropriate voltage setting.

2. Plug one end of the AC power cord into the AC power jack located on the back of the

pedestal of the left speaker.

3. Plug the other end of the power cord into an AC (mains) outlet.

4. Turn the power switch to ON (I). It is recommended that you leave this switch in the ON

position. The powered speaker system uses less than 11 watts in standby mode.

Bottom of pedestal

of powered (left)

speaker

Location of dual-voltage

selector switch

(under the grille)

November, 19, 2001

Europe &

America

Australia

115V

230V

Use the 230V setting

for Europe and

Australia

Use the 115V setting

for North and Central

America

AM264271_00_V.pdf