Bose 901 Manual do Proprietário - Página 10

Procurar online ou descarregar pdf Manual do Proprietário para Altifalantes Bose 901. Bose 901 20 páginas. Vi direct/reflecting speaker system
Também para Bose 901: Manual do Proprietário (41 páginas), Manual do Proprietário (23 páginas), Instruções de montagem e instalação (1 páginas), Manual do Proprietário (12 páginas), Manual de instalação e operação (15 páginas)

Connecting to the tape monitor

connection

Removing horseshoe pins

3. Connect one end of a cable to the AMPLIFIER INPUT jacks on the 901

a. Insert the ﬁrst connector ﬁrmly into the INPUT jack marked R.

b. Insert the second connector into the INPUT jack marked L.

4. Connect the other end of the cable to the OUT or RECORD jacks on your receiver. These

jacks may be marked TO INPUT, FROM INPUT, or REC.

a. Insert the ﬁrst connector into the OUT or RECORD jack marked R.

b. Insert the second connector into the OUT or RECORD jack marked L.

5. Connect the second cable from the AMPLIFIER OUTPUT jacks on the 901 active equalizer

to the IN or TAPE jacks on your receiver. These jacks may be marked PLAY, TO OUTPUT,

FROM OUTPUT, or MONITOR.

6. Plug the power cord of the 901 active equalizer into one of the switched outlets on the

receiver so that it will be powered when the receiver is switched on.

Use these instructions:

• for stereo-only operation if your receiver does not have a TAPE MONITOR connection.

• if you are using a surround sound receiver that has a section on the back marked PRE AMP

OUT/MAIN AMP IN. The jacks may be labeled ADAPTER or SIGNAL PROCESSOR.

If your receiver does not have this PRE AMP OUT/MAIN AMP IN section, the 901

speakers will not be usable in your home theater system.

1. The PRE AMP OUT/MAIN AMP IN jacks on your receiver are usually connected by small

bars called horseshoe pins. Remove these pins. See Figure 6.

Amplifier or Receiver

PRE

MAIN

AMP

OUT

active equalizer.