Bose Panaray 802 Series IV Manual de instalação - Página 9
Procurar online ou descarregar pdf Manual de instalação para Altifalantes Bose Panaray 802 Series IV. Bose Panaray 802 Series IV 24 páginas. Full-range-driver array loudspeakers
Também para Bose Panaray 802 Series IV: Manual de instalação (2 páginas), Manual de instalação (32 páginas)
Imprimir página
- 1. Panaray Series IV Loudspeaker Dimensions
- 2. Panaray ® 802 ® Series IV Loudspeaker U-Bracket
- 3. Panaray ® 802 ® Series IV Loudspeaker Mounting Options
- 4. Installation
- 5. Recommended Power Amplifiers
- 6. Recommended Dsp Settings
- 7. Panaray 802 Series IV Loudspeaker Specifications
- 8. Panaray 502 a Series Loudspeaker Specifications
pro.Bose.com
Panaray
802
Series IV loudspeaker mounting options
®
®
Panaray
802
Series IV loudspeaker U-bracket (for indoor or outdoor use)
®
®
The Bose
802 Series IV loudspeaker can be mounted on a wall or ceiling using the U-bracket accessory kit (not included).
®
Recommended Tools: 5 mm Allen wrench
CAUTION: 802 Series IV loudspeakers weigh 13.6 kg (30 lb). Use caution when lifting to avoid injury and/or damage to the loudspeaker.
Do not rest loudspeakers on their grilles.
Choose a mounting location that will safely support the weight (13.6 kg (30 lb)) of the loudspeaker. Refer to "Guide-
1.
lines for permanent installation of Bose
CAUTION: Choose a position and mounting method consistent with local building codes and regulations. Ensure the mounting
surface and the method of attaching the loudspeaker to the surface is structurally capable of supporting the weight of the
loudspeaker. A 10:1 safety weight ratio is recommended.
Hold the U-bracket in the mounting location and mark the holes.
2.
Drill four holes and mount the bracket using all four screws.
3.
Remove the backing from the foam tape and attach a bracket spacer to each side of the loudspeaker. Insert an M8
4.
cap screw into the front hole on each side of the loudspeaker. Do not tighten.
Panaray
loudspeakers" on page 3.
®
®
Installation
9