Atlas Copco PHE50H Instruções de reparação - Página 10
Procurar online ou descarregar pdf Instruções de reparação para Perfurar Atlas Copco PHE50H. Atlas Copco PHE50H 15 páginas.
Imprimir página
Assembly
1
Assembling the
Mount the ball bearing (E) and the locking
spindle sleeve
ring (D) on the spindle sleeve (F).
2
Mount the following parts inside the spin-
dle sleeve (F):
- rings (C, B and A),
- O-ring (9),
- sleeve (8),
- anvil (7),
- O-ring (6),
- ring (5),
- driver (4),
- O-rings (3),
- balls (2),
- bearing ring (1).
3
Insert the striker (G) with the O-ring (H)
into the spindle sleeve (F).
1
Mounting the
Press the needle bearing (5) into the con-
connecting rod
necting rod (6).
2
Push the connecting rod (6) into the pis-
ton (3) and secure it with the pin (4).
3
Push the O-Ring (2) onto the piston (3).
4
Insert the piston (3) completely with the
connecting rod (6) into the drill spindle
sleeve (1).
1
Mounting the
Press the ball bearing (2) flush into the
bevel wheel
gear box (6).
2
Press the bevel wheel (1) into the ball
bearing (2).
3
Press the pin (3) as well as the O-rings
(4 and 5) into the gear box (6).
Take care that the O-ring (2) on the pis-
ton (3) is not twisted. If necessary, lift
the O-ring (2) with a screwdriver and
straighten it.
Repair Instructions No.184.11/98
F
E
7
1
1
1
2
PHE 50 H
H
G
D
C
B
A
9
8
6
5
4
3
2
4
2
3
5
6
3
4
PAGE
9
1
5
6
2
3