Atlas Copco PN 3500 Instruções de reparação - Página 10
Procurar online ou descarregar pdf Instruções de reparação para Perfurar Atlas Copco PN 3500. Atlas Copco PN 3500 18 páginas.
Imprimir página
Cleaning
Clean all parts – with the exception of the electrical parts – with cold cleaning agent. Caution! No clean-
ing agent should penetrate into the bearing. Clean the electrical parts with a dry brush.
Check for wear
Check the disassembled parts for wear (visual inspection) and replace worn parts.
Electrical tests
Before reassembling, perform an electrical test on all relevant parts (see chapter Electrical and Me-
chanical Test Instructions).
Lubrication
Each time maintenance is performed, the machine is to be lubricates as stated in the lubrication plan.
After the machine is fully disassembled, completely remove the old grease and replace with new
grease. The grease must be applied to the machine as indicated in the lubrication plan.
Legend
A
Thickly cover with a total of 31 g Darina grease
B
Thinly cover with a total of 14 g Tivela grease
A
B
A
B
A
Repair Instructions No.179.11/97
PN 3500 / PN 3500 X
A
B
B
A
A
A
B
B
B
A
A
A
A
B
PAGE
9