Bose Acoustimass 10 Series I Manual do Proprietário - Página 10
Procurar online ou descarregar pdf Manual do Proprietário para Sistema de altifalantes Bose Acoustimass 10 Series I. Bose Acoustimass 10 Series I 18 páginas. Series 2
Também para Bose Acoustimass 10 Series I: Manual do Proprietário (25 páginas), Manual do Proprietário (17 páginas), Manual (17 páginas)
Imprimir página
Setting Up
Check the connections
Check all connections from the receiver to the Acoustimass
cube speakers (Figure 9). Make sure all speakers are connected to the proper terminals
according to their position in your room. Also make sure the two speakers with black
terminal tabs are connected as front speakers.
At the receiver, check that the wires are connected in phase (+ to + and – to –). Incorrect
wiring can result in a total loss of Acoustimass module output.
Be sure to correct any wiring problems before you plug your receiver in and turn it on.
L
FRONT SPEAKERS
R
L
LS
10
C
R
SURROUND SPEAKERS
L REAR R CENTER
RS
December 20, 2001
®
module and the module to the
OUTPUTS
TO CUBE SPEAKERS
L
C
R
LS
RS
LEFT
CENTER
RIGHT
LEFT
RIGHT
SURROUND
SURROUND
INPUTS
FROM RECEIVER OR AMPLIFIER
L
C
R
LS
RS
CAUTION:
Do not allow exposed wires to
brush against each other; this
could damage your receiver.
Figure 9
Completed connections
AM183644_01_V.pdf