L1
Compact
®
portable line array system
Engineers' and Architects'
Specifications
The system shall be a multiple driver, full-range
portable loudspeaker system with internally
supplied power amplification and active
equalization for multiple operating modes
as follows:
The transducer complement shall consist of six
2.00" (51 mm) high-excursion drivers mounted in
a curved Articulated Array
with an integral 8" (203 mm) low-frequency driver
mounted in a ported bass enclosure. The loud-
speaker array shall be wired in a series/parallel
configuration.
The nominal horizontal beamwidth of the
loudspeaker shall be 180° , and the vertical
coverage shall be 40. ° The system's power stand
shall incorporate a ported venting system for the
low-frequency driver, tuned for 65 Hz. The power
amplification for transducers shall be supplied by
the integrated power stand providing 130 W
continuous pink noise, band-limited from 65 Hz
to 14 kHz (-3 dB).
The input connectors of the power stand module
shall consist of one XLR with equalization for a
dynamic handheld microphone, one ¼" TRS with
selectable ToneMatch
signal processing for acoustic
®
guitar with piezo pickup, stereo RCA, and one
∕
" TRS receptacle. The output connectors of the
1
8
power stand shall consist of one ¼" balanced
TRS or unbalanced TS and two RCA unbalanced
phone plugs.
The enclosure of the power stand shall be
constructed of polypropylene materials. The
extension and array shall be constructed of ABS
materials. In collapsed tabletop mode, the
system's outer dimensions shall be 16.5" H x
13.25" W x 16.75" D (418 mm x 339 mm x 426
mm). Its weight shall be 24.6 lbs. (11.2 kg). In
extended operating mode, the system's outer
dimensions shall be 78.5" H x 13.25" W x 16.75" D
(1995 mm x 339 mm x 426 mm). Its weight shall be
29.2 lbs. (13.3 kg).
The system shall be capable of two operating
modes; collapsed tabletop or extended position
by integrating height-extension modules.
The loudspeaker shall be the Bose
portable line array system.
loudspeaker coupled
®
L1
Compact
®
®
Safety and Regulatory Compliance
The L1 Compact system complies with the
following standards:
•
UL/IEC/EN 60065 7
for Audio and Video Equipment
•
Ecodesign Directive 2005/32/EC
This equipment has been tested and found to
comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC rules. This product
complies with the Canadian ICES-003 Class A
specifications. This product conforms to the EMC
Directive 2004/108/EC Under standards: EN55103-
1 & 2: 1997, Environment 2.
How our Loudspeakers are
Measured
Calculated Max SPL
Calculated based on input sensitivity and maximum
input power rating exclusive of power compression.
More Information
Technical literature and other materials are
available at pro.Bose.com.
Edition Safety Standard
th
7
p r o . B o s e . c o m
OF 8
Imprimir página