3M SGLP200-CL-BP Manual de instruções de instalação e funcionamento - Página 8
Procurar online ou descarregar pdf Manual de instruções de instalação e funcionamento para Sistemas de filtragem de água 3M SGLP200-CL-BP. 3M SGLP200-CL-BP 17 páginas. Reverse osmosis filtration systems
Também para 3M SGLP200-CL-BP: Manual de instalação (17 páginas)
Imprimir página
CARTRIDGE & RO MEMBRANE CHANGE INSTRUCTIONS
Pre-filter Cartridge (Replace every 12 months)
1. Close tank shut-off.
2. Turn used pre-filter cartridge 1/4 turn to the left.
3. Pull down on cartridge.
4. Discard used cartridge.
5. Remove red cap from new cartridge and moisten the o-ring with water.
6. Insert new cartridge into the filter head.
7. Turn new cartridge 1/4 turn to the right.
8. Open tank shut-off and inlet valves.
9. Check for leaks.
Membrane (Replace every 24 months)
1. Close tank shut-off and inlet valves.
2. Turn used RO membrane cartridge 1/4 turn to the left.
3. Pull down on cartridge.
4. Remove the tubing from the fitting (refer to Figure 4).
5. Discard used cartridge.
6. Remove red cap from new membrane and moisten the o-ring with water.
7. Remove the plug from the RO membrane.
8. Insert the tubing from Step 4 into the new RO membrane. Ensure the blue flow control is properly pushed into
the tubing.
9. Insert new cartridge into the filter head. Be sure that the ears on the cartridge line up with the spaces in the head.
10. Turn new cartridge 1/4 turn to the right.
11. Repeat steps 5-12 from System start-up.
Remove the tubing from
the tting before completely
removing the RO membrane
Figure 4
7