Bose Lifestyle 18 Series II Manual de instalação - Página 15

Procurar online ou descarregar pdf Manual de instalação para Sistema de cinema em casa Bose Lifestyle 18 Series II. Bose Lifestyle 18 Series II 36 páginas. Dvd home entertainment system
Também para Bose Lifestyle 18 Series II: Manual de instruções (44 páginas), Manual de instalação (42 páginas), Manual do Proprietário (25 páginas), Manual do Proprietário (24 páginas), Manual do Proprietário (13 páginas), Manual de configuração rápida (3 páginas), Manual de instruções (44 páginas)

Connecting the Acoustimass

Figure 11

Acoustimass connection to

media center

module to the media center

Connect the Acoustimass module to the media center with the audio input cable (Figure 11).

Note: Be sure that each connector is fully inserted into each jack.

1. You may find it easier to insert the power adapter cord into the media center first. Do not

plug the other end into an AC (mains) power outlet until all connections are completed.

2. Plug the small black multi-pin connector (flat side up) into the Speakers jack labeled

"Main" on the back of the media center.

3. Insert the telephone-style RJ-45 connector on the other end of the audio input cable into

the Audio INPUT jack on the Acoustimass module. When properly inserted, it locks in

place.

Note: An antenna is built into the media center power cord; be sure to unwrap the power

cord for the best remote control operation (Figure 11).

Note: Refer to "Expanding your system to other rooms" on page 32 for information on con-

necting a second room.

Power adapter cord

Audio input cable

CAUTION: Do not place strain on the audio input cable, especially on the connection to the

Acoustimass module. Excessive strain on the cable may cause damage to the connection at

the Acoustimass module. When disconnecting the cable from the Acoustimass module, be

sure to press the tab on the connector.

Media center connector panel

Acoustimass module connector panel

Note: When fully inserted into the jack, the connector

locks in place. To release the cable connector, press

the tab.

System Installation