Before you play your first DVD
Loading and playing a DVD
Basic DVD operations
AM259776_01_V.pdf
This section tells you how to use the DVD player in your system to play video DVDs. Before
you play your first DVD, make note of the following:
• Make sure that you are familiar with the functions of the remote control buttons (see "The
remote control" on page 7). Although some remote control buttons look the same as those
found on a VCR or CD player remote, their functions are different.
• In order for some system features to work, the DVDs that you play must be encoded with
the information for that feature. For example, in order to display subtitles while watching a
movie, the disc must contain subtitle information.
• Both the DVD player in your system and the discs you play are coded by region. In order for
a disc to play, these region codes must match. Check the label on the media center or on
the shipping carton for your player's region code.
1. Turn your television on.
2. Press
to select the DVD player. If the system is off, this will also turn it on.
CD/DVD
3. Lift up the media center front door and press
4. Insert the DVD disc into the tray (label side up).
Open/Close
5. Press
to close the disc tray.
If the DVD disc does not start to play automatically, press
ask you to make some on-screen selections before the movie starts to play.
Note: Your system was set at the factory to automatically play a disc when it is loaded. This
feature can be turned off in the system settings menu. See "DVD setup submenu" on
page 32.
If you want to:
Pause a DVD movie ...
Resume play ...
Stop a DVD movie ...
Skip to the next chapter ...
October 30, 2001
Playing a Video DVD
Open/Close
.
Do this:
Press
.
Press
or
.
Press
once. Pressing
from the point you stopped the movie.
Press
twice. Pressing
the beginning.
Press Chapter up.
Channel
Chapter
Preset
Track
. Some DVD videos will
continues the movie
starts the movie from
13
Imprimir página