Bose SoundTouch 520 Manual do Proprietário - Página 33
Procurar online ou descarregar pdf Manual do Proprietário para Sistema de cinema em casa Bose SoundTouch 520. Bose SoundTouch 520 40 páginas. Series ii
Também para Bose SoundTouch 520: Manual do Proprietário (22 páginas), Manual de início rápido (2 páginas)
Imprimir página
Troubleshooting
Problem
No power
No sound
Sound is coming
from your TV
speakers
No or poor video
What to do
• Secure the Acoustimass
power cords.
• Reconnect the Acoustimass module's, soundbar's and console's
power cords firmly into an AC (mains) outlet.
• Use the remote control to power on the system.
• Unmute the system.
• Increase the volume.
• Plug the Acoustimass module, soundbar and console into a live AC
(mains) outlet.
• Insert the speaker cable into the Speaker Connections connector,
not the Bose
Link connector.
®
• Insert the HDMI
™
or Audio Return Channel. If your TV does not have an HDMI ARC
connector, use a secondary audio cable in addition to the HDMI
cable (see page 16).
• If using a secondary audio cable, insert the cable into a connector
on your TV labeled Output or OUT, not Input or IN.
• Secure all cable connections on the soundbar, TV and connected
sources.
• If your source is connected to your TV, select the correct TV input
(see page 25).
• Toggle CEC between Alternate On and Default On (see page 31).
• Disconnect headphones when not in use.
• If connecting your source through the
using the System menu (see page 31).
• If you are connecting headphones to the
Headphones using the System menu (see page 31).
• If you see the error message Cannot find Acoustimass, pair the
Acoustimass module with the console (see page 35).
• Reset the system (see page 36).
• Insert the HDMI cable into a connector on your TV labeled ARC or
Audio Return Channel (if available).
• Turn off your TV speakers (refer to your TV owner's guide).
• Decrease your TV volume to its lowest setting.
• Switch to a different source, then return to the affected source to try
and re-establish a signal.
• Disconnect and reconnect the HDMI cable of the affected source.
• Disconnect and reconnect the HDMI cable from the console to the
TV.
• Power off and on the affected source, TV and the console.
• If you assigned the optical, analog, or coaxial digital connector to
one of your HDMI
ing the system menu. See page 31.
Care and Maintenance
module's, soundbar's and console's
®
cable into a connector on your TV labeled ARC
sources, change it back to Auto/TV (Default) us-
™
connector, enable Audio in
connector, enable
English - 33