Abseco AFI-2M0S1B Manual de instalação - Página 9
Procurar online ou descarregar pdf Manual de instalação para Interruptor Abseco AFI-2M0S1B. Abseco AFI-2M0S1B 10 páginas.
Imprimir páginaProduct Familiarization & Installation Guide - Troubleshooting
Troubleshooting
If your bell switch is not operating correctly, perform the troubleshooting instructions
given below. If problem persists, contact your Abseco dealer or local authorized Abseco
service center.
FAULT
Not able to turn on the
Bell switch (indicator light
on the bell switch is OFF)
bell not ringing when bell
switch is turned on
(indicator light on bell
switch is ON)
®
Abseco
AFi Series Bell Switch - AFI-2M0S1B
PROBABLE CAUSE
No power supply or main
power supply is OFF.
Electrical connections to
the bell switch are
incorrect.
The electric bell is burned
out.
Electrical connections to
the bell switch are
incorrect.
REMEDY
Make sure that power
supply is available and
the main power supply is
ON.
Make sure that the
electrical connections to
the bell switch are
correct. Refer to Wiring
Diagram given in
Installation Instructions.
Make sure that the bell is
in working condition. If
necessary, use a an
electric bell that is in
working condition to
make sure that the fault is
not due to a burned
electric bell.
Make sure that the
electrical connections to
the bell switch are
correct. Refer to Wiring
Diagram given in
Installation Instructions.
Page 15