Bose B2000 Manual do Proprietário - Página 16

Procurar online ou descarregar pdf Manual do Proprietário para Amplificador Bose B2000. Bose B2000 19 páginas. Power amplifiers

7. BOSE

EQ Cards

7.3 EQ card fitting for bridged mono operation

The Bose EQ card should be fitted into the channel A connector inside the amplifier

and the input signal should be connected to input A. The bridge switch on the rear of

the amplifier should be set to bridge mode. The output is then taken from the bridged

output Speakon socket on the rear of the amplifier.

For Both B1500 & B2000

Re-fit the unit s cover (BEFORE CONNECTING THE ELECTRICAL POWER

TO THE UNIT) using the 12 TORX T10 screws removed earlier.

For further information about BOSE equaliser cards or fitting the equaliser cards into

the B1500 or B2000 power amplifiers please contact your Bose supplier.