Bose PM8500 Manual do utilizador - Página 16

Procurar online ou descarregar pdf Manual do utilizador para Amplificador Bose PM8500. Bose PM8500 44 páginas. Configurable professional power amplifier
Também para Bose PM8500: Ficha de dados técnicos (6 páginas), Manuais de instalação e segurança (21 páginas)

Imprimir página
Bose PM8500 Manual do utilizador
User guide

Making Connections

Connection and Configuration steps

Use the following procedure when setting up the PM8500 for the first time. Subsequent sections in this guide give details on each step.
1. Install any accessory cards (optional)
2. Mount the amplifier into the rack
3. Connect power cable and retaining clip
4. Turn on amplifier
5. Enable Standby Mode
6. Configure amplifier (use front panel or ControlSpace
7. Wire input connection from source device(s)
8. Wire output connectors to speakers
9. Disable Standby Mode
10. Connect Fault Notification Output to management system or device (optional)
11. Reset alarms
12. Test system

Power (Mains) Connection

Power connection is made using the included IEC power cord. The PM8500 also includes a retaining clip to help secure the power
connection to the amplifier. To install, place the retaining clip toward the center of the amplifier, plug in the IEC power cord, then swing
the retaining clip so it locks behind the IEC connector.
Figure 5. ieC Connector retaining clip in place.

standby Mode

Standby mode allows for changing speaker output cabling and software configurations without disconnecting power or triggering
alarms in the amplifier. You can enable or disable standby mode from the front panel of the PM8500 using the following steps:
MENU -> UTILITY -> STANDBY MODE -> ENTER STANDBY
Page 16 User Guide
Designer™ software)
®
pro.bose.com
English