Bose 31952 Manual do Proprietário - Página 12

Procurar online ou descarregar pdf Manual do Proprietário para Auscultadores Bose 31952. Bose 31952 43 páginas. Aviation headset

00_Cavu.book Page 8 Thursday, October 28, 2010 12:03 PM

Tab 8, 16

Tab 7, 15

REPARING THE

Your headset may be shipped with the microphone assembly (boom microphone

and cable) attached to the left earcup. If your headset is shipped with the

microphone assembly packed separately, you can attach it to either earcup.

Choose the earcup (L or R) to receive the microphone assembly. Also, make

sure that the earcup connector pins are clean and free of debris.

1. Use a Phillips screwdriver to loosen the two screws on the access cover

near the bottom of the earcup where you want to attach the

microphone assembly.

2. Remove the access cover to reveal the connector pins on the earcup.

3. Carefully line up the microphone assembly to the small connector socket

on the earcup.

4. Slide the connector into the socket until it reaches the stop.

Connector

Access

pins

cover

Microphone assembly

CAUTION: Do not force the connector into the socket, or earcup damage may

occur.

5. Tighten the screws to secure the assembly.

6. Attach the access cover to the earcup that does not have the microphone

assembly attached. Insert the screws, then align and tighten them.

Note: The headset will not work without the access cover installed.

CAUTION: Be sure to try the headset and fully test its operation before flight.

Tab 6, 14

Tab 5, 13

Tab 4, 12

EADSET FOR

Connector pins

Tab 3, 11

Tab2, 10

L for left

English