24/7 FIRE PROTECTION FP946 Manual - Página 11

Procurar online ou descarregar pdf Manual para Alarme de fumo 24/7 FIRE PROTECTION FP946. 24/7 FIRE PROTECTION FP946 19 páginas. Ionisation smoke alarm with hush

Imprimir página

1. Installation

Operation

Testing

Test the unit, to ensure proper operation, by pressing the

Test/Hush button for at least 5 seconds (or until the unit

sounds). This will sound the alarm if the electronic

circuitry, horn, and battery are working.

CAUTION: Due to the loudness (85 decibels) of the

alarm, always stand an arms-length away from the unit

when testing.

If no alarm sounds, the unit has a defective battery or

other failure. DO NOT use an open flame to test your

alarm, you could damage the alarm or ignite combustible

materials and start a fire.

Test the alarm weekly to ensure proper operation. Erratic

or low sound coming from your alarm may indicate a

defective alarm (see Warranty section).

NOTE: WEEKLY TESTING IS REQUIRED.

LED Indicators

This alarm is equipped with a red LED indicator, with

three modes of operation.

Red LED - Flashing every 40–50 seconds: Indicates that

the smoke alarm is operating properly.

Red LED - Flashing: When the Test/Hush button is

pressed, or when the smoke alarm senses particles of

combustion and goes into alarm (constant pulsating

sound), the red LED will flash once per second. The

flashing LED and pulsating alarm will continue until the air

is cleared.

Red LED - Alarm silencer (Hush

mode) indication: The

red LED will flash every 10-11 seconds, indicating the

smoke alarm is in the alarm silencer (Hush

) mode.

NOTE: WEEKLY TESTING IS REQUIRED.