DROMEAS Alma HC Manual de Instruções - Página 7

Procurar online ou descarregar pdf Manual de Instruções para Mobiliário de interior DROMEAS Alma HC. DROMEAS Alma HC 12 páginas. Working desk
Também para DROMEAS Alma HC: Manual de Instruções (17 páginas)

Imprimir página
3.

Instructions for use

3.1 Safety regulations

The electrically adjustable Alma HT/HC working desk is designed exclusively for office use.
Any other or further use is considered inappropriate use. In the event of inappropriate use,
Dromeas assumes no responsibility for any damages that may occur and no guarantee for the
perfect and functional operation of the parts. The intended use also includes compliance with
all the instructions in this manual.
DANGER: Contact with electrical voltage can cause serious injury or death!
Unplug or insert plug connections only when there is no voltage
Do not attempt to open the enclosures of the following items: controller, lifting units,
control lever
Metal parts of the work desk may have a high voltage and cause damage to cables and
connections
Do not ground electrical equipment on the desk frame
WARNING: Risk of crushing!
Ensure that there is enough lateral clearance (at least 2.5 cm) in all surrounding objects, walls,
etc. throughout the lifting stroke range
WARNING: Risk of injury and damage!
When transporting or moving the office, keep it carefully only from the frame
WARNING: Risk of injury and damage!
If a CPU computer base is loaded with a weight greater than the approved weight (15 kg), the
fastening screws may break.
3.2 Unpackaging and disposal of packaging material
It is suggested that you keep children at a safe distance when unpacking. As described in
section 2.2.1, the packaging of the product consists of light, reusable materials. The user is
required to perform a separation of the packaging materials. It should be noted that the
company works with certified recyclers.

3.3 Assembly and installation

Dromeas recommends that the installation be made by a specialist representative or an
assembly company. For correct assembly, please refer to the assembly drawing (see