Dromone Multi-Lock Quick Coupler Manual do Proprietário - Página 9
Procurar online ou descarregar pdf Manual do Proprietário para Escavadoras Dromone Multi-Lock Quick Coupler. Dromone Multi-Lock Quick Coupler 18 páginas. Excavator automatic quick coupler
Imprimir página
Operating Instructions
The operating instructions contained in
this manual are a guideline for use with
the Dromone Control Box. Please con-
tact you plant department or training
department if another system has been
implemented at installation. A copy of
this may be found in the appendix at the
end of the manual. Please contact your
plant or training department for a copy
of this instruction.
To guarantee satisfactory and safe op-
eration of the equipment, it is strongly
recommended that the 'MULTI-LOCK
Quick Hitch' be installed and fitted by
trained personnel only.
Installation of the 'MULTI-LOCK Quick
Hitch' must be in accordance with the
instructions provided in this manual, any
deviation from the instructions given
here needs to be authorised by Dro-
mone Engineering personnel.
Any difficulty with interpretation of the
installation instructions in this manual
should be resolved between the fitter
and Dromone Engineering, before pro-
ceeding any further -
ASK.
Bucket/Attachment Pickup
Before attaching to a bucket or any
other attachment it is important to
check for the following. Familiarise
yourself with the coupler and machine
controls prior to use with attachments.
A. The attachment is fitted with the
correct pins at the correct centre
distances and that they are
QMS 22
REV: D - JAN2012
Dromone Multi– Lock Quick Coupler
IF IN DOUBT
Dromone Multi– Lock Quick Coupler
9
secured properly in place.
B. Ensure that the 'MULTI-LOCK
Quick Coupler' has been left safe
after previous use / operation.
C. Ensure that the area within the
maximum machine swing radius
is clear of all personnel and
obstacles.
D. If the In-Cab control system is not
supplied by Dromone, this may
affect the performance and safety
of the coupler. Always check the
sequence and function matches
the sequence outlined in this
manual.
Procedure:
1.
From the operators seat in the
machine cab the 'MULTI-LOCK
Quick Hitch' must be fully
crowned inwards to the transport
position in order to disengage the
automatic latching system. Fully
extend the bucket cylinder and
hold over relief.
Fig 2. Excavator in transport
position
Author:EOD
Approved:MS