Anker A3944 Perguntas frequentes - Página 2
Procurar online ou descarregar pdf Perguntas frequentes para Auscultadores Anker A3944. Anker A3944 3 páginas.
Imprimir página
What should I do if any of the
following problems occur?
1. Only one earbud has sound.
2. One side of the earbud does
not pair with the other or my
device.
3. No music plays after
connecting to my device.
4. Cannot pair or reconnect with
my device.
What should I do if Life P2 Mini
disconnects, the sound is choppy
bluetooth
or has an audio drop issue?
How do I connect to a second
device?
How do I set up Life P2 Mini
when I want to use them to make
calls via a Windows computer?
How do I reset Life P2 Mini?
What audio codecs does Life P2
Mini support?
Sound
Place the earbuds in the charging case and close the lid for 10 seconds. Then open
the lid and try pairing again.
If that doesn't work, try the following:
1) Forget the Bluetooth pairing record on your device if you have previously connected
the earbuds.
2) Reset the earbuds. See "How do I reset Life P2 Mini?" for more information.
Some environments (such as airports, offices, crowded public spaces etc.) can
interfere with your Bluetooth connection. To optimize your Bluetooth connection:
1) Ensure that your phone is on the right hand side.
2) Download videos and songs instead of streaming.
3) If you have an Android phone, temporarily disable unnecessary app traffic settings
on your phone.
Or you can try:
- Putting the earbuds back in the charging case and close it to re-pair your earbuds.
- Resetting the earbuds. See "How do I reset Life P2 Mini?"
- Try a different device if possible.
If you want to pair Life P2 Mini with a second device, please use one of the following
methods:
- Turn off Bluetooth on your current device so the earbuds can enter pairing mode.
Or
1) Place the earbuds back into the charging case (Make sure the earbuds are
powered on and keep the lid open).
2) To enter pairing mode, press and hold the button on the case for 3 seconds until
the 3 LED indicators flashes white in sequence continuously.
Please do not remove the earbuds from the case before pairing them with a second
device.
- Set up both the microphone and speaker as "Hands-Free".
Note:
- If the microphone is set as "Hands-Free" and the speaker is set as "Stereo," you will
hear the person on the other end, but they cannot hear you.
- If the microphone is set as "Consistent with the System" and speaker is set as
"Stereo," the computer's microphone will pick up your voice instead of Life P2 Mini.
- When making calls, "Hands-Free" mode should be selected. For music listening,
"Stereo" mode should be used.
1) Place the earbuds in the charging case and leave the lid open.
2) Press and hold the button on the case for 10 seconds until the 3 LED indicators
blink white 3 times and then flashes white in sequence continuously. This confirms
that the reset was successful and your earbuds have entered pairing mode.
SBC and AAC.