DROPSA 201000 Manual do utilizador e de manutenção - Página 6
Procurar online ou descarregar pdf Manual do utilizador e de manutenção para Bomba de água DROPSA 201000. DROPSA 201000 10 páginas. Pneumatically operated pump
9. MAINTENANCE PROCEDURE
Locate the machine in conditions which facilitate easy access.
Utilize individual protection to avoid contact with the lubricant.
After having been subjected to stringent inspection by ourselves, the pump requires a minimum of maintenance.
Prior to any cleaning or maintenance operations, close off the power supply and exhaust the pressure from the
pump and the tubing to which it is connected.
Do not subject the pump, the connections, the tubing or the parts under pressure to violent knocks; damaged tubing
and connections are dangerous and should be replaced immediately.
After long periods out of service check the tightness of all the parts subjected to pressure.
It is recommended the use of pure lubricants and a periodical accurate cleaning of pump components.
The pump has been designed to require the minimum of maintenance.
1. Disconnect the air supply and the lubricant delivery tubing;
2. Empty the tank of lubricant;
10. DISPOSAL
During maintenance or disposal of the machine care should be taken to properly dispose of environmentally
sensitive items such as oils or other lubricants. Refer to local regulations in force in your area.
When disposing of this unit, it is important to ensure that the identification label is also destroyed.
11. ORDERING INFORMATION
Instructions for ordering
reser
pump
voir
system
part N°
Kg/Lt
201610
2
201618
2
201670
2
201671
4
201672
4
201686
1.5
201620
2
201253
1
03/04/06/33
201259
1
03/04/06/33
201600
4
04/06/26/33
201615
4
04/06/26/33
201605
2
04/06/26/33
201625
2
04/06/26/33
201690
2
max
26
Grease NLGI 00
26
Grease NLGI 2
26
Grease NLGI 00
26
Grease NLGI 00
26
Oil 15/1000 cst
26
Grease NLGI 00
26
Oil 15/1000 cst
Grease NLGI 00
Grease NLGI 00
Grease NLGI 00
Oil 15/1000 cst
Oil 15/1000 cst
Grease NLGI 00
33
Grease NLGI 0
AVILABLE VERSIONS
Command air
del.
pressare - bar
per
stroke
min
max
cm³
8
2
8
8
2
8
8
2
8
8
2
8
8
2
8
8
2
8
8
2
8
35
2
10
35
2
10
35
2
10
35
2
10
35
2
10
35
2
10
35
2
10
Overall
dimensions
Comp
height
ratio
mm
mm
50:1
565
115
with min & max elect. level
50:1
565
115
with min & max elect. level
50:1
383
160
without min & max elect. level
50:1
560
160
with min & max elect. level
50:1
560
160
with min & max elect. level
50:1
420
160
with min & max elect. level
50:1
565
115
with min & max elect. level
10:1
395
110
without min & max elect. level
10:1
495
163
in sealed housing
10:1
540
163
with min & max elect. level
10:1
540
163
with min & max elect. level
10:1
555
115
with min & max elect. level
10:1
555
115
with min & max elect. level
10:1
590
115
with min level
NOTE
6