Anker 757 Manual do utilizador - Página 5

Procurar online ou descarregar pdf Manual do utilizador para Gerador portátil Anker 757. Anker 757 19 páginas. Portable power station
Também para Anker 757: Manual do utilizador (12 páginas)

Imprimir página

Light

Ambient light

Press the button once to turn on the ambient light, and press again up to 2 times to switch between brightness

levels.

SOS mode

Press and hold the button for 2 seconds to turn on SOS mode.

LCD Screen Guide

Current Output Power

Current Input Power

IoT

Press the IoT button for 2 seconds and connect your devices through the app when this icon appears on the

screen.

Remaining Battery for Expansion Battery

When the expansion battery is connected successfully, this icon appears on the screen.

USB-A Output Port

USB-C Output Port

Car Charging

AC Charge and Voltage Frequency

SOS

Low-Temperature Alert

When this icon shows, stop using the power station until the icon disappears.

High-Temperature Alert

When this icon shows, stop using the power station and let it cool down until the icon disappears.

Overload Warning

This icon appears when a port is overloaded. The port will be turned o to avoid any damage.

Please remove the device causing overload.

Estimated Time to Fully Recharge

Estimated Time for Battery to Deplete

Remaining Battery for Power Station

Power Saving Mode

Trouble Shooting

AC recharging failure

When AC recharging is unavailable, check to see if the overload protection switch is switched on. If so, press it

down to reset, and then recharging can resume.

AC charging failure

If AC charging is unavailable, it's possible that the connected devices exceed 1800W. Try unplugging one or more

of the connected devices to see if this resolves the issue.

Resetting your Power Station

If your Power Station isn't working correctly, press the reset button (located on the front of the product) for 1

second for a factory reset. If the Power Station still doesn't work, please visit [email protected]