Anker PowerHouse 256Wh Manual do utilizador - Página 5
Procurar online ou descarregar pdf Manual do utilizador para Gerador portátil Anker PowerHouse 256Wh. Anker PowerHouse 256Wh 10 páginas. Portable power station
Também para Anker PowerHouse 256Wh: Manual do utilizador (17 páginas)
Imprimir página
Flashlight Mode
Press the button once to turn on the ambient light.
x1
Hold the button for 2 seconds to turn on SOS mode.
2S
FAQ
Q1: What's the max power output of the AC port?
200W, and if you use the AC port for devices greater than 200W, the product will automatically turn off.
Q2: Can I recharge the product while charging connected devices?
Yes.
Q3: Can this product power a CPAP?
Yes, but do not forget to turn off the Power Saving Mode first.
x1
Q4: Will this product lose power automatically if not powered off?
Yes, when the car socket or AC control button is turned on, even if no devices are being charged, there will still be a
certain amount of no-load power consumption. To avoid draining the battery, we recommend keeping Power Saving
Mode turned on except when you are charging low-powered devices like CPAP machines and cameras.
Q5: What kind of solar charger can charge this product?
Any 12V-28V solar charger with a DC 8mm（DC 7909）male connector.
05
SOS
Specifications
Cell Capacity
256 Wh
DC Input
11-28V
Car Charger Output
12V
10A
AC Output
110V~ 1.82A, 50Hz/60Hz, 200W
USB-A Output
5V
3.6A (2.4A Max Per Port)
USB-C Input
5V
3A/ 9V
USB-C Output
5V
3A/ 9V
Operating Temperature
32°F-104°F / 0°C-40°C
Ambient Temperature
32°F-104°F / 0°C-40°C
Size
21.6*21.14*14.4cm/ 8.5*8.32*5.67inches
Net Weight
3.7kg/8.16lbs
Gross Weight
4.34kg/9.57lbs
Attention
Not permitted on aircraft.
IMPORTANT SAFETY INSTRUCTIONS
WARNING - When using this product, basic precautions should always be followed, including the following:
Read all the instructions before using the product.
• To reduce the risk of injury, close supervision is necessary when the product is used near children.
• Do not put fingers or hands into the product.
• Do not expose the product to rain or snow.
• Use of a power supply or charger not recommended or sold by the product manufacturer may result in a risk of fire
or injury to persons.
To reduce risk of damage to the electric plug and cord, pull the plug rather than the cord when disconnecting the
product.
• Do not use the product in excess of its output rating. Overload outputs above rating may result in a risk of fire or injury to
persons.
• Do not use the product that is damaged or modified. Damaged or modified batteries may exhibit unpredictable
behavior resulting in fire, explosion or risk of injury.
Do not operate the product with a damaged cord or plug, or a damaged output cable.
• Do not disassemble the product. Take it to a qualified service person when service or repair is required. Incorrect
reassembly may result in a risk of fire or electric shock.
• Do not expose to fire or high temperatures. Exposure to fire or temperatures above 130°C may cause explosion.
To reduce the risk of electric shock, unplug the power pack form the outlet before attempting any instructed
servicing.
• Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that
the safety of the product is maintained.
• When charging a device, the product may feel warm, this is a normal operating condition and should not be cause
5.5A (65W Max)
3A/ 15V
3A/20V
3A (60W Max)
3A/ 15V
3A/20V
3A (60W Max)
06