DROPSA 3414100 Manual de operação e manutenção - Página 7

Procurar online ou descarregar pdf Manual de operação e manutenção para Bomba de água DROPSA 3414100. DROPSA 3414100 15 páginas.

6. Unpacking and Installation

Once you have identified the place suitable for installation, open the packaging, remove the pump

and check to ensure that it has not suffered any damage during transportation and storage. The

packing material does not require special disposal precautions as it is in no way dangerous or

pollutant. For disposal, refer to local regulations.

 Place the pump and fasten it to its support by using the appropriate Ø9 mm holes (0.354 in),

with 2 suitable screws.

 Assemble the pump in such a way that the cartridge housing and the bleed valve are easily

accessible.

 Leave at least 100 mm (3.94 in) as a perimeter distance with respect to other equipment or

barriers to prevent access to the pump.

 Assemble the pump at "labourer height" in order to prevent abnormal posture or possible

impact.

 Do not install the pump submerged in liquids and/or in aggressive environments.

 Do not install the pump in environments where there are explosive or flammable mixtures.

 Do not install the pump near heat sources.

 Verify that the grease used is fit for operating temperatures, especially at temperatures

below 0° C. If in doubt, contact our Sales Technical Office for the correct choice of

lubricant.

The connection with the hydraulic oil is marked with "A" and its size is G1/4". The connection with

the lubricant outlet is marked with "B" and its size is G1/4".