3M PELTOR WS LiteCom Pro III Series Manual - Página 4

Procurar online ou descarregar pdf Manual para Auscultadores 3M PELTOR WS LiteCom Pro III Series. 3M PELTOR WS LiteCom Pro III Series 13 páginas.

Imprimir página

3M PELTOR WS LiteCom Pro III Series Manual

3M™ PELTOR™ WS™ LiteCom Pro III Headset

MT73H7*4D10EU

MT73H7*4D10EU-50

MT73H7*4D10NA

MT73H7*4D10NA-50

Introduction

Congratulations and thank you for choosing 3M™ PELTOR™

Communication Solutions! Welcome to the next generation of

protective communication.

Intended Use

These 3M™ PELTOR™ headsets are intended to provide

workers with protection against hazardous noise levels and

loud sounds while allowing the user to communicate with

built-in two-way radio or Bluetooth

users read and understand the provided user instructions as

well as be familiar with the use of this device.

IMPORTANT

Please read, understand, and follow all safety information in

these instructions prior to use. Retain these instructions for

future reference. For additional information or any questions,

contact 3M Technical Service (contact information listed on

the last page).

INTRINSIC SAFETY

The 3M™ PELTOR™ WS™ LiteCom Pro III Headset,

MT73H7*4D10EU-50, MT73H7*4D10NA-50 has been certi-

fied to be intrinsically safe for use in potentially explosive

atmospheres. The user is responsible for ensuring that

the intrinsically safe 3M™ PELTOR™ WS™ LiteCom Pro

III Headset and accessories are used in the appropriate

atmospheres as defined by the approved area classifications

and according to the user instructions. Failure to do so

may result in serious injury or death. See separate Safety

Guide included in the product box for more information.

If there is any risk that the safety or integrity of the unit has

been compromised, the unit must be taken out of operation

immediately and removed from the potentially explosive

atmosphere without delay. Action must be taken to prevent

the device from being accidentally placed into operation

again. Contact 3M Technical Service for service and repair.

. It is expected that all

MT73H7*4D10EU-50

Presafe 16ATEX8960X

Certified by DNV Nemko Presafe AS as Intrinsi-

cally Safe for Use in Hazardous Locations

I M1 Ex ia I Ma -20°C ≤ Ta: ≤ +50°C

II 1G Ex ia IIC T4 Ga -20°C ≤ Ta: ≤ +50°C

II 1D Ex ia IIIC T130°C Da -20°C ≤Ta:≤+50°C

IECEx Presafe 16.0086X

Certified by DNV Nemko Presafe AS as Intrinsi-

cally Safe for Use in Hazardous Locations

Ex ia I Ma -20°C ≤ Ta: ≤ +50°C

Ex ia IIC T4 Ga -20°C ≤ Ta: ≤ +50°C

Ex ia IIIC T130°C Da -20°C ≤ Ta: ≤ +50°C

MT73H7*4D10NA-50

CSA 17.70112567

Certified by CSA Group as intrinsically Safe for

Use in Hazardous Locations

Ex ia IIC T4 Ga, Cl I, Zn 0, -20°C ≤ Ta ≤ 50°C

(Canada)

AEx ia IIC T4 Ga, Cl I, Zn 0, -20°C ≤ Ta ≤

50°C (United States)

Class I, Division 1, Groups A, B, C & D; Class

II, Division 1, Groups E, F & G; Class III,

Division 1; Temperature Code T4

WARNING

To reduce the risk of igniting an explosion which, if not

avoided, could result in serious injury or death:

• Ensure that the 3M

PELTOR

Headset and any intrinsically safe accessories are only used

and stored in the classified areas consistent with the marked

equipment ratings.

• Never connect electronic components or devices to the

headset in a potentially explosive atmosphere.

• Only connect to the headset the intrinsically safe 3M

PELTOR

Spare Parts and Accessories listed in this User

Instructions. SUBSTITUTION OF COMPONENTS MAY

IMPAIR INTRINSIC SAFETY.

• Only use the 3M™ PELTOR™ Battery ACK082, 3M™

PELTOR

Charging Cable AL2AH, and 3M™ PELTOR™

Power Supply FR08 (or equivalent SELV 5V power supply).

• Never change or charge the ACK082 battery in a

potentially explosive atmosphere.

• Do not use headset or accessories if they are damaged or

malfunctioning in any way.

• Only use 3M™ PELTOR™ Authorized Service Centers for

service and repair.

LiteCom Pro III