anko HEG30MBB Manual do utilizador - Página 13

Procurar online ou descarregar pdf Manual do utilizador para Ventilador anko HEG30MBB. anko HEG30MBB 13 páginas. 30cm bench fan

Imprimir página

30cm black metal bench fan

Please refer to the Instruction Manual for more details and images of the assembly procedure.

STEP 1: SET UP THE FAN BASE

Locate the neck of the

Fan

Head

into

recess in the top of the

Base then flip over.

STEP 2: ASSEMBLE SAFETY GRILLE AND FAN BLADE

Remove the protective plas-

tic sleeve from the motor

spindle shaft and the 4

Screws as identified.

Slide and push the Fan Blade

onto the spindle. Push on until

the end of the fan blade hole

is aligned with the end of the

spindle.

If you are missing a part or having troubles when assembling the fan, please feel free to call

our friendly customer service team on our toll free number: 1300 105 888 or via email

[email protected]. We will be glad to assist you.

Insert the threaded part of

the "L" screw through the

the

hole in the bottom of the

base and screw all the

way in tightly.

Fit the Back Safety Grille into

position and refit the 4 Screws

and tighten. (*Note: The handle

on the back of the grille should

be at the top)

Then fix and tighten the

screw. (Note: Ensure the

screw is lined up with the

"FLAT".)

QUICK START GUIDE

Stand the Fan assembly

upright on its base ready

for assembling the grille.

Rotate the motor spindle

until the "FLAT" surface

is facing up.

Place the Front Safety Grille

into position and secure it by

closing the clips over the outer

rim.

Using the Small Nut and Bolt,

fasten the two grilles together.

FLAT

Surface

20220617_RV1