anko 42836933 Manual de instruções - Página 5

Procurar online ou descarregar pdf Manual de instruções para Mobiliário para bebés e crianças anko 42836933. anko 42836933 8 páginas. Wooden cot

To adjust Mattress Base Height

Carefully lay the cot down on the

Side Panel.

Remove the 4 x Filler Bolts and

Nuts from the lower base position

on the End Panels.

Carefully slide the Mattress Base

to the lower position.

Ensure the pre-assembled dowel

in the Mattress Base correctly

inserts into the pre-drilled dowel

hole in the End Panel.

Carefully stand the cot upright.

Check all Bolts are tightened

until firm.

Do not over tighten bolts. Over

tightening bolts can cause panels

to crack.

Remove 4 x 35mm / 1.4in

Mattress Base Bolts.

Loosen the bolts of one End

Panel.

Secure the Mattress Base using 4

x 35mm / 1.4in Bolts.

Tighten until firm.

The cot is now ready for use in low base mode.

NOTE: Loosening the bolts

of one end panel will assist

in avoiding any scratches or

dents to your Cot whilst sliding

the mattress base down to the

lower position. If end panel

bolts are loosened during this

process, ensure they are re-

tightened after you have moved

the mattress base.

Refit 4 x Filler Bolts and Nuts

to the upper Mattress Base

Mounting Holes to prevent

possible finger entrapment.