anko LD-T1002 Manual do utilizador - Página 7

Procurar online ou descarregar pdf Manual do utilizador para Torradeira anko LD-T1002. anko LD-T1002 8 páginas.

2. Lay the toaster on its back.

3. Slide the latch (9) to the "open" position to unlock and

panel (8) from the toaster bottom.

4. Wash Glass panel (8) in warm soapy water, rinse and dry thoroughly.

the Glass panel (8) back into the toaster bottom and Slide the latch

Replace

(9) to the "LOCK" position to lock.

Note: the toaster will not operate if the glass panel

locked correctly.

Heating tubes

1. To prevent damage, do not touch or wipe the heating tubes.

2. Any loose crumbs found under the heating tube should be cleared by gently

shaking the toaster and allowing it to drop into the crumb tray.

Care and cleaning

1. Before cleaning, disconnect the appliance from mains power outlet and let

the appliance cool down completely.

2. Pull out crumb tray at the bottom of the toaster and empty it. If the toaster is

used frequently, accumulated bread crumbs should be removed at least once

a week. Make sure the crumb tray is completely closed before using the

toaster again.

3. Wipe the outside of the toaster with a slightly dampened cloth and polish with

a soft dry cloth.

4. Do not immerse the toaster in water or other liquids.

5. When not in use or during storage, the power cord may be wound under the

bottom of toaster.

WARNING! Fire Hazard. The crumb tray should be cleaned regularly. Do not

allow breadcrumbs to accumulate in the bottom of the toaster.

Voltage : 220-240V~ 50-60Hz

Power

: 850 – 1000W

(8)

the Glass

slide out

is not fitted and