Airtel BMF-422 Manual do utilizador - Página 8
Procurar online ou descarregar pdf Manual do utilizador para Router sem fios Airtel BMF-422. Airtel BMF-422 16 páginas. 4g hotspot
Wi-Fi.Settings: Set the parameters related to Wi-Fi.
•. 802.11.Mode:.Select.the.mode.used,.such.as.802.11.b/802.11.g/802.11.n.
•. SSID:.This.is.the.name.of.the.Wi-Fi.network,.which.was.used.to.identify.your.Wi-Fi.network..
The length of the SSID should be 1-32 characters including "_".
•. SSID.Broadcast: The default setting is "Enable".
•. Wi-Fi. Channel: Different domains have different channels (Channel 1~11 in FCC (US)/IC
(Canada);.Channel.1~13.in.ETSI.(Europe);.Channel.1~13.in.MKK.(Japan)).
•. Max.Number.of.Users: Set the maximum number of Wi-Fi users. The default and maximum
value is "15".
•. Security:.Set.the.cipher.for.Wi-Fi;.Select.an.encryption.mode.in.the.list.and.set.your.password..If.
you.select."Disable",.any.Wi-Fi.enabled.device.can.connect.to.the.device.without.the.password.
•. WEP: Lower security. Works with older Wi-Fi devices. Recommended only if your devices
don't support WPA or WPA2.
•. WPA:.A.strong.security.standard,.supported.by.most.Wi-Fi.devices..8.to.63.ASCII.characters.
needed.
•. WPA2:.A.stronger,.newer.security.standard..Limited.to.newer.Wi-Fi.devices..8.to.63.ASCII.
characters needed.
Login.Settings:.Define.your.login.password.
•. Login.password.characters:.4-16,.if.exceeds.16.characters,.you.are.not.allow.to.proceed.
•. If.an.invalid.character.is.input,.error.message.is.displayed.under.user.name.and.data.is.not.
saved.
•. Password. can. contain. letters,. numbers,. and. symbols. (ASCII. characters. 4-16),. but. not. the.
following:.".;.\.&.%.+.'.<.>.?
Profile.management:.Edit.your.profile.
PIN.Code.Settings: PIN operation: include three behaviours: Enable/Disable/Modify.
Note: •. When.you.entered.the.wrong.PIN.3.times,.PUK.is.needed..You.can.get.this.key.from.
the operator.
•. PIN code: 4-8 digits.
Connection.mode:.Automatic or Manual at draw down list.
Network.mode:.Auto,.2G.only,.3G.only,.4G.only.modes.in.draw.down.list.
Advanced.Settings
DHCP
•. Router IP Address: The router's IP address on the LAN. The default setting is "192.168.1.1".
•. Subnet Mask: The router's internal LAN subnet mask. The default setting is "255.255.255.0".
•. Host Name: Name of web server.
•. DHCP Server: DHCP Server will automatically assign IP addresses to devices on the
network. The default setting is "Enable".
•. DHCP IP Pool: Set a range of IP addresses available to access.
8